1986 2.8 MFI Core in Pensacola Florida

Subscribe
Oct 2, 2013 | 06:48 PM
  #1  
I wish I was joking when I say I have a parts bin. I literally have a Camaro filled to the roof with all kinds of parts. I need to clear this inventory if I'm gonna have room for anything else.

V6 parts are from the Camaro itself. V8 and other parts are saved from my fathers old shop. Lots of miscellaneous SBC stuff to go through.

I really need to get this stuff moved on BAD.

1986 Camaro LB8 V6 parts:
Valve covers -$30 for both or $15 for one
Exhaust manifolds -$60 for both or $30 for one
EGR assembly -$20
Throttle body -$30
Mass Air Flow -$20
Fuel rail -$35
Fuel injectors -$80 for the set or $15 each
Intake manifold -$35
Lower intake plenum -$30
Upper intake plenum -$40
Distributor cap -$15 (Like new.)
Distributor rotor -$5 (Like new.)
Distributor ignition switch -$10

Also available:
Rochester 2 Jet small bore carburetor (ask for specifics. This unit is for parts.)
GM cruse control transducer (I forget what it is off of.)
Chevrolet Surbaban 8 lug wheel covers (I have three of them.)
SBC Crank Pullys ( part #s 3972180 CE and 3932428-CH)
SBC Hydraulic Fan Clutch
3800 ignition module

Parts album link: https://www.thirdgen.org/g/album/3050053



Engine bay...full of parts.



Drivers side...full of parts.



Passengers side...full of parts.

Too much to list and not enough space to get around...

Check this space as I add more parts.

My other ads on the forum:
https://www.thirdgen.org/forums/exte...ellaneous.html
https://www.thirdgen.org/forums/inte...-interior.html
https://www.thirdgen.org/forums/exte...heetmetal.html

Thanks for taking a look.
Reply 0
Oct 4, 2013 | 08:29 PM
  #2  
Re: 1986 2.8 MFI Core in Pensacola Florida
Bump.
Reply 0
Oct 6, 2013 | 02:14 PM
  #3  
Re: 1986 2.8 MFI Core in Pensacola Florida
Another bump.
Reply 0
Oct 12, 2013 | 02:45 PM
  #4  
Re: 1986 2.8 MFI Core in Pensacola Florida
Bump
Reply 0
Oct 15, 2013 | 12:01 PM
  #5  
Re: 1986 2.8 MFI Core in Pensacola Florida
Bump.
Reply 0
Oct 26, 2013 | 05:34 PM
  #6  
Re: 1986 2.8 MFI Core in Pensacola Florida
Bump.
Reply 0
Nov 7, 2013 | 06:06 PM
  #7  
Re: 1986 2.8 MFI Core in Pensacola Florida
Bump.
Reply 0
Nov 14, 2013 | 09:57 PM
  #8  
Re: 1986 2.8 MFI Core in Pensacola Florida
Bump.
Reply 0
May 23, 2020 | 09:13 PM
  #9  
Re: 1986 2.8 MFI Core in Pensacola Florida
Reviving this dead monstrosity...I'm kinda embarrassed.

This one goes out to all the folks still running the 60* V6 in your F-body. I have parts.

There are many parts I have uncovered from elsewhere. Watch this space for any updates.
Reply 0
Aug 3, 2020 | 05:27 PM
  #10  
Re: 1986 2.8 MFI Core in Pensacola Florida
I'm not even sure where to pick up from. The situation with this engine has changed. All the top end pieces have been removed save for the cylinder heads. I don't know if I want to describe the rest.

If you need parts for a V6 car you have this option. I'm tempted just to sink this thing in a river otherwise. Everybody runs a V8 and I don't blame you. The sound is glorious.
Reply 0
Aug 13, 2020 | 11:03 AM
  #11  
Re: 1986 2.8 MFI Core in Pensacola Florida
To the top. Original post has been edited for 2020 relevancy. I may have something of value for the right person.
Reply 0
Aug 20, 2020 | 01:47 PM
  #12  
Re: 1986 2.8 MFI Core in Pensacola Florida
Bump.

2020 relevant and very much so. I let this mess get too big.

Anything here is up for grabs. photos reveal all.
Reply 0
Subscribe