All items located in Rochester, NY. Prices include shipping unless stated otherwise (larger parts I'll have to get quotes on). I will accept paypal or cash in person. Parts sold on a first come, first paid basis. Feel free to ask any questions. I usually can't check emails / PMs until the evening, but I will get back to you as soon as I can.

SOLD B&M 144 supercharger SBC intake manifold.


B&M 144 supercharger. Snout pulley has one rib that is flat and crank pulley has a chip in the front, but belt still works fine on them. A new Weiand snout pulley is included. I do not have hardware. Comes with intake, belt and tensioner. Shipping to be calculated because this is heavy. $950




SOLD B&M Superjection (EFI). Made specifically for blowers. 1,000 CFM. Comes with computer, wiring, fuel pressure regulators, injectors, throttle plate, air hat, Walbro fuel pump, fuel filter, MAF sensor and instructions. A blower with this system and Moroso short engine mounts will fit under the stock flat second-gen hood.


SOLD Billet Specialties two-piece aluminum valve covers for SBC. Awesome shape. $225




BNIP B&M Hi-Tek wire holders $12
B&M 90535 Supercharger Pulley for 144/174/250 blower. 6 groove. 3” diameter. $50
SOLD B&M shifter handle. Needs to be polished.

 

interested in B&M Superjection, is it a working system?

 

i bought it off of a working car at least 5 years ago. i had this same system on a '72 camaro i used to own and was planning on building a copy engine for my '84 Trans Am, but decided to do a turbo LQ4 instead.
i also have the instruction manual which is not in the picture but is included. i just realized you will also need a temperature sensor, which i should have here somewhere. if i can't find it, you can purchase one from Auto-nomics. when you call ask for Bruce Johnson. he's the only guy who sells and services these systems:
http://www.auto-nomics.com/

here's some pics of the similar setup on my old camaro:

 

so 275 shipped?

 

Yes sir.

 

ok, ill take it.