Parting out whole car.

 

Does anyone know if the passenger side and driver's side front seat backs are interchangeable? If so, how much for the passenger front seat?

 

You know, thats a great question. I really never thought about that lol. Let me do a little digging and see what I can find out.

 

is the center arm rest cover in good working order

 

The padded vinyl part is good but the hard plastic under it is broke in many pieces.

 

Okay, let me know.

 

They aren't, because the recline mechanism and pivot hinge are reversed, and there are visible bolt holes through the covers if you try to interchange them. BTDT.

 

Thanks.

 

Bump

 

Is arm rests on doors in good shape how's dash can you ship?

 

Arm rests are good, dash pad is cracked, big plastic dash not sure, I will have to look at it tomorrow.

Yes I can ship.. Arm rests won't be a prob, but dash will be expensive to ship.

Arm rest $30 each, $50 for the pair if you want both.. Plus shipping

 

.

 

Send me pic of arm rest 7654387994 my area code is 46970 can you tell me how much it is all together

 

Yes Sir, I sure can. I will pull them off this evening and get you pictures of all sides of them and get you the shipping price and total cost.

Thank you,
John

 

Are the fabric covers and foam swappable though? As in, could an upholstery guy un-hog ring the pass cover and put it on a driver side frame?

 

DO you have a fog light switch for the dash?

 

Here are the pictures of the arm rest. My g/f took the pictures for me cause I was not home/able to. The other round black plastic part that goes on arm rest and against door panel trim is included and damage free. She just couldn't get it to fit back on and didn't want to break anything so she didn't try to force it on.









Total shipped would be $65, shipping is a little higher than I though it would be due to the length/size of box needed

 

Sorry, no fog light switch

 

Happen to have the hatch release switch with the visible lettering/ picture?

Thanks,
Ed

 

I got the switch, but no visible markings at all on it

 

How much for the door panels?

 

$80 for the pair + shipping... Upper plastic rails or any other trim not included at that price

 

Does the driver power seat still work?

How much for just the tracks, motors, switch, trim plate and the male and female pigtails for the wiring harness.

Could you pm me a close up of the power seat switch please

 

Yes Sir, The power seat still works in every direction. I tested it out the other day to make sure. Yes I would be willing to sell just those parts.

Give me a couple of hours and I will get you some close up pictures and we can talk price

 

Was this a stick car? Does the steering column have tilt? If so I would be interested. Shipped to 49327

 

It was an auto car and tilt wheel but that column is loose/wobbly at the tilt joint. I do have the key for it. $50 + shipping if you want to try to tighten it up.

I have a good tilt column from an 87 but it's pending local sale.. So if the buyer don't show this weekend it will be for sale.

I also have a good non tilt column from an '84 with key that I would let go for $125

No steering wheels on any of the columns.

 

How much for just the power seat tracks, motors, switch, trim plate and the male and female pigtails for the wiring harness.

 

Sorry, I sold all the power seat parts a few weeks ago.

 

Is the hood in great shape? If it is can you price it for local pickup? Thanks Carl

 

Sorry Carl, someone bought the hood 6 weeks ago. But if you are local PM me your # and I can call you if I get another louver'ed hood. I buy third gen parts cars all the time.

I'm starting up a small side business parting out third gens

 

Is the driver side door panel still available? if so how much for just the driver side plus shipping to 14094. Thanks

 

Are the rear arm rest pieces and hatch area panels still available? If so can you send pics and advise price...would need shipping to Orlando area (32750 zip)...also what about the front seat belt buckles? Thanks.

 

power window switches?

 

Sorry I did not see this post until now. Yes sir I still have those arm rest panels. What all rear hatch area panels do you need?

PM me with your needs and I will get up the parts and get you pictures of parts and a shipping quote..

Front seat belt buckles are not in very good shape. The plastic covering/sleeve is all broke up

 

The PW switches from that car are sold, but I have more PW switches. I know I just removed 2 from a '89 camaro that works,

and I have 2 in a '84 TA that I have not checked out yet.

$10 each + shipping on the PW switches.

 

Thanks, those seat belt buckles are tough to find in decent shape...mine are in the same shape as yours...PM sent!

 

Take a look at these pics, these are the pieces I need...wasn't successful at uploading to the PM...







You can see the passenger side arm rest is sun beaten as is the piece around the speaker cover





You can see the difference in the good panel over the spare tire vs the one toward the front with alll the sun exposure...I don't think it can be saved...





Same thing here on the driver side...you can see that the sun destoryed the panel (part next to glove box)...and is lighter in color as a result...these are the pieces I am looking for

 

Hood Louvers for sale? How much? Shipping? Pics?

 

Never mind one of them is broken

 

That's ok man, those sold long time ago. In fact I think that was the 1st part that sold from that car. Even with the one broke. Those louvers are hard to find. I had people breaking down my door to get them for $100

 

Do you have the the plastic radiator cover panel that goes between the front bumper and the radiator - covers up the hood latch area?

 

I do not have one with out cracks/breaks in it. I have a couple but both has some type of cracks. If still interested I can get you a picture

 

Hi there,
Is the center console pad in good shape? If so, how much to ship to 48152?

 

Is the driver window still available and if so what shape is it in?

I have two sitting at my house, but they are semi scratched and don't want to use them... I just ruined my new one with some welding sparks that was to replace my scratched one.

 

I forgot what the name of the board is thats on top of the windsheild wiper motor, but i would like to purchase a working assy. The entire plastic assy containing the board. Do you have that? Mine does not work.

 

Bear with me guys. I will get y'all quotes and pictures. I'm real slow right now due to an abscess tooth and severe pain. My face is swollen to the point it looks like I'm holding an egg in my cheek... This crap HURTS

So I will get yall the pictures, info and price/shipping price ASAP

I do have a console pad (no plastic under it though, just the foam backed vinyl pad)

I have 3 wiper motors/PCB, just need to test them to make sure they all work

I have 5 third gens I'm parting so I should have a good driver door glass.

 

Hi there,
Thanks about the pad. My plastic and hinge are in good shape, so I just need the pad. How much shipped to 48152?

 

Have you got a chance to test those wiper pcb boards?

 

How Much For The power Lock Panel /switch shipped to 33010

 

Just getting back on top of things and was able to check.. I do not have any super clean/clear door glass. All are semi scratched, sorry