ahight the only things lift to finish this motor are distributor and intake and heads gaskets. i need to sell asap lost intrest. bought a new car, so i have no need for the motor anymore. invested around 2 G's in the motor but will let go for 1500 obo. pick up only i live in lawton oklahoma

here are a list or the parts:

-2 bolt main 350 bored .30 over
-speedpro forged pistons pn# 2256
-moly rings
-forged rods
-scat steel crank pn# 9018
-clevite h-serise rod & main bearings pn's# 663 & 909
-rotating assembly is fully balanced
-arp head and main bolts
-powerforce 8" balancer pn# 80002
-comp cam xtreme cam & lifters kit pn# CCA-C12-262-4 duration @50 218/224 LSA 114
-comp cam double roller timing chain pn# CCA-2100
-scat sfi approved flexplate
-oil pan and summit high volume oil pump
-votec heads 062 casting the heads were bowel ported, studed, drilled for bigger springs and good for .525 lift and have new valve seals. there ready to be bolted on
-edelbrock airgap rpm proformer intake pn# 7516
-edelbrock fuel pressure regulator kit pn# 8192
-holley 750 carb VS pn# 3310 it just needs to be put back together i rebuilt it you just have to torque everything down.
- 2 polyurethane motor mounts pn# 3.111AG

i dont keep up with this site anymore so u can email me @ highway28o@yahoo.com