Dec 6 meeting
Thread Starter
Supreme Member
Joined: Dec 2001
Posts: 2,862
Likes: 1
From: I won't tell either
Car: 1986 Grand Prix TPI
Engine: 350 TPI
Transmission: 200 4R
Dec 6 meeting
If there is a meeting tomorrow, I probably won't be able to make it, but I have a couple of ideas to bang around.
If the xmas dinner will be at Knotts on the 13th, then why not eliminate the gift exchange. That weekend is their annual toy drive BRING A TOY WORTH AT LEAST $10.00 AND GET IN THE PARK FOR FREE. So buy a toy for the kids and we don't have to worry about buying a 3rd gen gift and the park is free.
Also due to the number of people in our group do we get a reservation time, or do we still have towait in line. If a reservation time then I suggest 4-6pm. If we have to wait in line then I suggest about 2-3pm. And we should all wait in line, as if one or two people let a large group cut in line that REALLY irritates those behind us.
If the xmas dinner will be at Knotts on the 13th, then why not eliminate the gift exchange. That weekend is their annual toy drive BRING A TOY WORTH AT LEAST $10.00 AND GET IN THE PARK FOR FREE. So buy a toy for the kids and we don't have to worry about buying a 3rd gen gift and the park is free.
Also due to the number of people in our group do we get a reservation time, or do we still have towait in line. If a reservation time then I suggest 4-6pm. If we have to wait in line then I suggest about 2-3pm. And we should all wait in line, as if one or two people let a large group cut in line that REALLY irritates those behind us.
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
I was going to mention that you should bring a toy valued at $10 or more if you want to arrive earlier and enjoy the park. I plan on bringing a toy and playing in the park. Knott's Christmas Crafts Festival is also going on for a separate $6 admission fee if you wanted to do a lil shopping.
If there isn't much interest in holding the reular Meeting, I'd just as soon stick around here and crank out product I'm running low on this weekend.
Lon
If there isn't much interest in holding the reular Meeting, I'd just as soon stick around here and crank out product I'm running low on this weekend.
Lon
Supreme Member
Joined: Aug 1999
Posts: 2,842
Likes: 0
From: Woodland Hills, CA USA
Car: Yes...
Engine: Last time I checked...
Transmission: See "Engine"...
Originally posted by lonsal
I was going to mention that you should bring a toy valued at $10 or more if you want to arrive earlier and enjoy the park. I plan on bringing a toy and playing in the park. Knott's Christmas Crafts Festival is also going on for a separate $6 admission fee if you wanted to do a lil shopping.
If there isn't much interest in holding the reular Meeting, I'd just as soon stick around here and crank out product I'm running low on this weekend.
Lon
I was going to mention that you should bring a toy valued at $10 or more if you want to arrive earlier and enjoy the park. I plan on bringing a toy and playing in the park. Knott's Christmas Crafts Festival is also going on for a separate $6 admission fee if you wanted to do a lil shopping.
If there isn't much interest in holding the reular Meeting, I'd just as soon stick around here and crank out product I'm running low on this weekend.
Lon
What is the interest in the meeting? I'll probably be wrenching on my car tomorrow and would prefer not to have to rush around worrying about getting to the meeting. If there is little interest I'm going to opt to stay home and try to fix my car.
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
Well if you guys say you arent going to go, that's not much incentive for anyone else to go, too. 
I want to have a meeting, but I dont want to show up to 6 people again.

I want to have a meeting, but I dont want to show up to 6 people again.
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
I'm more than willing to make the drive to the meeting. It just seemed that we were dwindling to another 6 people meeting as last year. One important topic to discuss is whether we go forward with the new web site. Considering zero discusson regarding the topic, it doesn't give me any incentive to shell out money a site that no one cares if we have or not. I think it is important to decide on this topic once and for all and either move forward, with full support, or drop it and continue with TGO adopting us as orphans.
Lon
Lon
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
None of us that have the address of the new site are posting anything or making suggestions on the new message board. That's why its not going anywhere. I say we just give out the address and letting the "general public" start using it.
Trending Topics
Member

Joined: Jul 2001
Posts: 371
Likes: 0
From: West Hills California USA
Car: Assorted
Engine: Various
Transmission: Manual and Automatic
I can make the meeting. I will bring the Scanner Bret if your going to make it. If we are not going to have a Meeting, Somebody give me a call (818) 996-3879 and let me know. I'm getting ready to move and 20+ years of living in the same place has to start getting ready to go.
Supreme Member
Joined: Aug 1999
Posts: 2,842
Likes: 0
From: Woodland Hills, CA USA
Car: Yes...
Engine: Last time I checked...
Transmission: See "Engine"...
I think we need to take a roll call of who plans to attend the meeting.
If enough people are planning to go I'll be there. My car has been running fine the last two days, but I'm headed to Kay Auto in the AM to grab a new EGR valve and solenoid just in case I need them. After that I'm gonna test the injectors and relpace the CCV hose. If all goes well I won't be pulling the plenum off.
Lang, I'll give you a call tomorrow and let you know about the Snap-On scanner. I'm hoping my Auto Xray cable will arrive tomorrow so I can run it on the GTA.
If enough people are planning to go I'll be there. My car has been running fine the last two days, but I'm headed to Kay Auto in the AM to grab a new EGR valve and solenoid just in case I need them. After that I'm gonna test the injectors and relpace the CCV hose. If all goes well I won't be pulling the plenum off.
Lang, I'll give you a call tomorrow and let you know about the Snap-On scanner. I'm hoping my Auto Xray cable will arrive tomorrow so I can run it on the GTA.
Supreme Member

Joined: Dec 2001
Posts: 2,203
Likes: 2
From: Anaheim, CA
Car: 1990 RS
Engine: LO3 TPI
Transmission: W/C T5
Axle/Gears: 3.73
I don’t think I’ll be able to make it. I have to work until 3 o’clock and then accompany the owner to the venue our Christmas party is being held for final menu selection. So realistically I would be looking at a 5:30-6:00 departure time. I’m sure you will agree that an extremely spirited drive to Valencia for a six person meeting simply isn’t worth the possibility of incarceration. But hey you never know…
Member
Joined: Dec 2001
Posts: 350
Likes: 0
From: SCV/Leona Valley, CA
Car: '83 T/A WS6
Engine: carbed 305
Transmission: 700R4 w/ shift kit
I should be there...The BF works till 6 so we may be a bit late but we'll be there! I have to show everyone my new bling-bling wheels
and Alex's new super low stance!(you'll probably hear him scrap as he pulls into the driveway) That makes 2 more! Plus we have a couple of noobs that may show up...and I believe we have a few locals in SCV now that should show up...
I was thinking maybe some with a list of everyones e-mail should drop a group e-mail about meets/events the Wendsday before(or 3 days from whenever it is) cause some of these guys aren't as addicted as us and dont check the board everyday...The day after we all meet we always get posts saying, aww I missed it?, I forgot!, etc...I know I have just plainly forgot there was a meeting or was planning on it and the day before, forgot and made plans that overlap it...
This way we have an aproximation for a roll call and if it doesnt look good we have a day to send out an e-mail calling it off...dunno just an idea!
and Alex's new super low stance!(you'll probably hear him scrap as he pulls into the driveway) That makes 2 more! Plus we have a couple of noobs that may show up...and I believe we have a few locals in SCV now that should show up...I was thinking maybe some with a list of everyones e-mail should drop a group e-mail about meets/events the Wendsday before(or 3 days from whenever it is) cause some of these guys aren't as addicted as us and dont check the board everyday...The day after we all meet we always get posts saying, aww I missed it?, I forgot!, etc...I know I have just plainly forgot there was a meeting or was planning on it and the day before, forgot and made plans that overlap it...
This way we have an aproximation for a roll call and if it doesnt look good we have a day to send out an e-mail calling it off...dunno just an idea!
Joined: Dec 1999
Posts: 5,964
Likes: 37
From: Hacienda Heights, CA
Car: 90 RS 'Vert, 88 IROC-Z, 88 Firebird
Engine: 305 ci tbi, 305 ci tpi, 350 ci tpi
Transmission: WC-T5, WC-T5, 700R4
Axle/Gears: 3.45, 3.27, 3.27
I'm going and bringing a half hour "Story of Camaro" on VHS for Show 'n Tell. Frank Watson (FUBAR) will be going also to answer any questions about the web site.
Lon
Lon
Supreme Member
Joined: Aug 1999
Posts: 2,842
Likes: 0
From: Woodland Hills, CA USA
Car: Yes...
Engine: Last time I checked...
Transmission: See "Engine"...
Originally posted by lonsal
I'm going and bringing a half hour "Story of Camaro" on VHS for Show 'n Tell. Frank Watson (FUBAR) will be going also to answer any questions about the web site.
Lon
I'm going and bringing a half hour "Story of Camaro" on VHS for Show 'n Tell. Frank Watson (FUBAR) will be going also to answer any questions about the web site.
Lon
Thread
Thread Starter
Forum
Replies
Last Post
TMZIrocZ350
Engine/Drivetrain/Suspension Parts for Sale
1
Oct 7, 2015 12:09 PM








