BrandenCali

Well lately I have pretty much all the front end torn down.. Im going to replace every thing every one has mentioned and see if this shaking goes away, and better steering ability..

Car is needing a lot of work this year.. And Smog is this year.. great..

JERRYWHO

Tune-up is done and got some street time on the new combo. I have chip #4 in the car and it's running better with each one. A big thanks to Don and Kevin for all help with good info and a very good baseline chip to start with.

Jerry

8T8IROC

iTrader: (3)

Glad to hear it Jerry, does that mean you'll be going to Fontana on the 17th?

JERRYWHO

Yep, I wish it was on the 10th the car is ready for a run at the record.

Jerry

Btw what is the record E.T. and MPH.

8T8IROC

iTrader: (3)

I believe that would be your fastest timeslip Speaking based upon the group here of course

8T8IROC

iTrader: (3)

How large of a shot are you running on the 17th?

BrandenCali

He might be talking about Team Bunny best et mph n/a...

8T8IROC

iTrader: (3)

Rumors indicate it is supposed to be a 12.3x as far as I recall.

JERRYWHO

No nitrous just all motor 350 long tube runner tpi for now.

Jerry

JERRYWHO

The best run I have seen by the bunny is 12.8X but the rumor is that it has gone 12.6X.

Jerry

8T8IROC

iTrader: (3)

Quite true, the best I have actually seen is a 12.8X same as you probably the same pass at California Speedway. Now the rumor is a 12.6X from C-Bad, but then a 12.3X with all the goodies removed from the car like the interior and sway bar - but then again it is Mike and James :lala:

JERRYWHO

I think the 12.3x was just B.S. and the 12.635 @ 109.84 by mike might be also. I wonder if he will ever post the time slip for that run... that is if he has it.

Randy will you be at Fontana on the 17th.

Jerry

8T8IROC

iTrader: (3)

Donna & I plan on being there on the 17th, I might just be able to finally break into the 12s with a really good 60'

Grey Goose

Jerry you never cease to amaze me. The time slip in question was posted and available for viewing for months but just for those to lazy to look for it here it is…

Time Slip

Jerry if a craftsman as skilled and determined as yourself cant trap a low 12 second N/A time slip with a set of hogged out 113’s and enough converter to pull a house down then I guess all of the respect and reverence Team Bunny has for both you and your accomplishments will have sadly been misplaced.

Oh and the 12.3X you all jeer? Show me a worthy contender and I will hand back a victim dripping with embarassment.


Children!

Dwayne88IROC

This is what I just got!

8T8IROC

iTrader: (3)

Looks like Santa made a visit a half a year early Dwayne

8T8IROC

iTrader: (3)

Wouldn't that the direct application of the qoute in your signature?

Dwayne88IROC

HoHoHo!

Can't wait to install it next tuesday.

Dyno Don

iTrader: (7)

Better get ready to bring it on

james_85Z28

Hey Rusty, you forgot to log Randy off first

Randy- I need a translation in english please........

james_85Z28

It's already been brought'n !!!!


....don't wait for us, we've been waiting for you. It's just taken you longer to not reach us, which is longer than we thought

VincentZ28

iTrader: (2)

Just have your *** ready by July 17 at Fontana. Can you at least do that instead of watching others race?

Dyno Don

iTrader: (7)

Wasn't referring to me....or any of our equipment
That will come soon enough

james_85Z28

The last time Kevin raced, Clinton was in office and yahoo was at 400. By the time you both realize your last couple years planning and effort was in vain, Mike and I will be two steps ahead of you again.

Grey Goose

DAMN!

james_85Z28

you had your shot and you no-showed like a little Beotch...remember???

Dyno Don

iTrader: (7)

So....what have you done lately....???

james_85Z28

passed smog, filled with gas, topped off the oil....and got 26.5 MPG going to my sisters house in China Lake

Grey Goose

Extrude honed SuperRam, Runners, and Base - $800.00
Engine rebuild and secret cam profile - $1500.00
IAC motor - $40.00 & 5 minutes

Showing up to race in your moms bone stock 89 – priceless

Dyno Don

iTrader: (7)

Good job....but hardly anything to crow about

james_85Z28

who's crowing...you asked

VincentZ28

iTrader: (2)

James is gonna slip and get smoked just like his clutches. :rockon:

Dyno Don

iTrader: (7)

passed smog, ............ $50.
filled with gas, ............$40.
topped off the oil.... $2.95
got 26.5 MPG ...........Nice savings

Missing sarcastic remark....Priceless

james_85Z28

Did it take you all night to come up with that one?

james_85Z28

I know you're joking. I ordered a custom fuel tank for my truck this week and I should get it in 4-6 weeks. So look for a September date for my new combo...since I have a couple years before my next smog and my truck will be running by September, I have more options now

VincentZ28

iTrader: (2)

Originally posted by james_85Z28
I know you're joking. I ordered a custom fuel tank for my truck this week and I should get it in 4-6 weeks. So look for a September date for my new combo...since I have a couple years before my next smog and my truck will be running by September, I have more options now



Big freakin' deal!

Dwayne88IROC

I thought that the 17th was our BBQ.

Dyno Don

iTrader: (7)

It is....and racing afterwords

8T8IROC

iTrader: (3)

It is in reference to the following:

Team Bunny

"You see what power is - holding someone else's fear in your hand and showing it to them!"

Which is located at the bottom of Mike's signature

RWB____s

What have I done to my 3rd gen. I have put it up for sale along with my truck 98 Dodge Ram and open car trailor with electric brakes. All three for a paltry sum of $22,000 with all spare parts, I am also the original owner of the camaro.

james_85Z28

Why did you decide to do that? What are you moving onto? I would have liked to see what you auto-x car would have done in a different venue.....

lonsal

iTrader: (2)

'88 Formula: Installed a gray/black leather Grant steering wheel. Found $2.41 worth of rattles (aka coins) under the center console and under the carpeting below the seats. Replace the broken right tailight and center firebird plastic filler piece. Cleaned the carpeting and washed it for the first time. I cleaned up the new (used) center console I'll be installing. I still need to pull out the radio pod so I can replace it too. Both the radio/HVAC pod and center console had been repaired with ugly drywall screws to solve the common delamination of the foam backed vinyl. I need to make similar repairs to the one I got from House of Camaro, but I'll use epoxy instead. I have a new console top and lid to install too. I need to cut holes for the electric window switches. I've e-mailed JBL about getting a new faceplate for the CD2000 stereo. It was mfg in '99, but it is not listed as a current model, so I'm not holding much hope that a new faceplate will be available. I pulled off one of the inner quarter panel pieces and discovered a Pioneer 6x9 speaker (actually 4 speakers in one) rather than OEM. There was a washer stuck to one of the tweeters which can't help the sound I'm sure. I still have to install the powder-coated sway bars, steering brace and end links. I'm surprised how well it still drives with no front or rear sway bars.

Lon

8T8IROC

iTrader: (3)

Also what did/do you set the timing at with a 150 or larger shot?

Thanks again

james_85Z28

I ordered some new parts. The IE boys are getting too fast for half-*** attempts and now that I know that Vincent is still several tenths off on a good day and just as fast on a bad day....well....time to get to work

8T8IROC

iTrader: (3)

8T8IROC

iTrader: (3)

Parts doesn't quite narrow it down, James, an LS1 could be parts as well as a NOS Kit Besides Vince doesn't need a bad day to end up reading my REAR license plate all the way down the track...

james_85Z28

I heard you beat him pretty bad...knowing vince that's what fueled his fire to 12.8X.

Parts are parts......but in this case they involve a 3.5" hole saw, some bailling wire, a couple gaskets and some compressed gas Besides how fun would it be if I let the cat of the bag so early

8T8IROC

iTrader: (3)

Yeah he wasn't pleased, fueled him all the way to end up on top with a 2/3 win ratio against me for the night, to be fair, though I still have my own issues with it slowing down, though taking nothing way from the 12.8x pass.

You might as well let it out of the bad, both you and Mike have hired Jennibella to run the car for guys, saving a bit on weight therefore increasing top MPH

james_85Z28

Jenibella can't drive a stick (no disrespect )...that's why all their cars are autos.

Actually I only ordered one part of plan A and have to determine the profile of the other component. Then I still have plan B and plan C to take care of and then install them...forming plan D (all of the above). This painstaking process will result in all the records being broken as well as your hopes, dreams, and will to compete.... and that will become my legacy. You will all bow down before my maxed out plastic and fear the two-tone Bunny with a bad paint job. I'll tell you now but you'll hear me later.....as Kevin once said but could never back up, "you don't want to mess with me as I'll leave a bad taste in your mouth".

8T8IROC

iTrader: (3)

Wow, didn't know you were so bitter from Kevin 'backing up' his promise to let you taste his candy cane

BTW - I believe plans (A through D) + Mike P =