New H.M.S. Strut Mounts Post
Member
Joined: Jul 1999
Posts: 294
Likes: 0
From: Vancouver, Canada
Car: Camaro Z28 1LE R7U
Engine: 5.0 TPI
Transmission: G-Force Dog-Ring T5
So far I have shipped 13 sets - all those who have paid have been shipped. Just got 12 of those out the door today!
I shipped Scott's on friday - and I wanted to be SURE they got through customs o.k. - so I checked monday and everything was fine - so 12 more went out the door today. Everyone should receive an automated e-mail with the tracking info when your mounts are shipped.
So as per normal - there was a small delay (SNAFU) but everyone should be very happy very soon.
If anyone has any problems with shipping - or any other issues - please contact me.
One final note that I want to re-state here, as it has not been said in a while - and I forgot to mention this on the info sheet I sent with the mounts is: DO NOT USE THE FACTORY DUST SHIELD. The cover that goes around the top of the strut rod does NOT fit with these mounts. I know I said this a long tome ago - in the old thread - so I thought it important to bring this up again here.
I shipped Scott's on friday - and I wanted to be SURE they got through customs o.k. - so I checked monday and everything was fine - so 12 more went out the door today. Everyone should receive an automated e-mail with the tracking info when your mounts are shipped.
So as per normal - there was a small delay (SNAFU) but everyone should be very happy very soon.
If anyone has any problems with shipping - or any other issues - please contact me.
One final note that I want to re-state here, as it has not been said in a while - and I forgot to mention this on the info sheet I sent with the mounts is: DO NOT USE THE FACTORY DUST SHIELD. The cover that goes around the top of the strut rod does NOT fit with these mounts. I know I said this a long tome ago - in the old thread - so I thought it important to bring this up again here.
Supreme Member
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
karl, now that you sent all of the ones for those who paid, do you have a timeline for those of us who didn't have deposits in?
Thread Starter
Supreme Member
iTrader: (2)
Joined: Jan 2001
Posts: 4,149
Likes: 3
From: Tampa, FL, USA
Car: 93 240SX
Engine: LQ9
Transmission: T56
Axle/Gears: 3.54 R200 IRS
Originally posted by Christobal
They have arrived in SoCal! Looks good, and my initial quality control inspection based on the GoodTime system show all systems go. Now I hope they help my Mustang handle!
They have arrived in SoCal! Looks good, and my initial quality control inspection based on the GoodTime system show all systems go. Now I hope they help my Mustang handle!
Thread Starter
Supreme Member
iTrader: (2)
Joined: Jan 2001
Posts: 4,149
Likes: 3
From: Tampa, FL, USA
Car: 93 240SX
Engine: LQ9
Transmission: T56
Axle/Gears: 3.54 R200 IRS
Got mine today, look great, dropped them off at the polishing shop a few minutes ago, those who say your waiting for emails on a set, need to be patient, im very sure he's been busy with the sets that those of us did actually pay for, I do understand you have been waiting a while, but so has everyone else, and we actually put down money to get them done, they will be worth the wait, i assure you.
Supreme Member
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
Originally posted by Z28racer
Got mine today, look great, dropped them off at the polishing shop a few minutes ago, those who say your waiting for emails on a set, need to be patient, im very sure he's been busy with the sets that those of us did actually pay for, I do understand you have been waiting a while, but so has everyone else, and we actually put down money to get them done, they will be worth the wait, i assure you.
Got mine today, look great, dropped them off at the polishing shop a few minutes ago, those who say your waiting for emails on a set, need to be patient, im very sure he's been busy with the sets that those of us did actually pay for, I do understand you have been waiting a while, but so has everyone else, and we actually put down money to get them done, they will be worth the wait, i assure you.
i think it is RIGHT that he get ALL sets out to those that paid before he even thinks about getting to us.
of course i have been waiting just as long (if not longer) than anyone who paid, just at the time he took deposits i was un-employed and could not justify paying at that time.
Member
Joined: Feb 2002
Posts: 198
Likes: 0
From: oklahoma
dewey, I remember your posting, and I am sure that you are one of the first 5 in line for a set now that those of us who have paid previously have received theirs, oh btw I have now received my set, look great, I am pleased. Thank you Karl, and Tom..I say tom because you started the original thread about these ages ago.
Supreme Member
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
yeah i have been trying to get a set for a LONG time
https://www.thirdgen.org/techbb2/sho...threadid=90118
https://www.thirdgen.org/techbb2/sho...threadid=90118
Thread Starter
Supreme Member
iTrader: (2)
Joined: Jan 2001
Posts: 4,149
Likes: 3
From: Tampa, FL, USA
Car: 93 240SX
Engine: LQ9
Transmission: T56
Axle/Gears: 3.54 R200 IRS
Originally posted by Dewey316
i never said it wasn't worth the wait , and i am being very patient just waiting here.
i think it is RIGHT that he get ALL sets out to those that paid before he even thinks about getting to us.
of course i have been waiting just as long (if not longer) than anyone who paid, just at the time he took deposits i was un-employed and could not justify paying at that time.
i never said it wasn't worth the wait , and i am being very patient just waiting here.
i think it is RIGHT that he get ALL sets out to those that paid before he even thinks about getting to us.
of course i have been waiting just as long (if not longer) than anyone who paid, just at the time he took deposits i was un-employed and could not justify paying at that time.
I hope Karl emails you soon to let you know you can order 
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Hey Dewey...I'll sell you my set for $600...shipping will be free!!
Ed
Ed
Supreme Member
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
Originally posted by ebmiller88
Hey Dewey...I'll sell you my set for $600...shipping will be free!!
Hey Dewey...I'll sell you my set for $600...shipping will be free!!
i just got my e-mail from karl this morning.
:hail: :hail: :hail: :hail:
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Got mine earlier this week. Man these things are SWEET!!!
Thanks again, Karl, great service and parts!
Ed
Thanks again, Karl, great service and parts!
Ed
Supreme Member
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
WHOOO HOOOO!!!!!
When i get home from work they should be there
and THANKS KARL.
Oct 18, 2002
5:43 A.M. PORTLAND, OR, US OUT FOR DELIVERY
3:27 A.M. PORTLAND, OR, US ARRIVAL SCAN
5:43 A.M. PORTLAND, OR, US OUT FOR DELIVERY
3:27 A.M. PORTLAND, OR, US ARRIVAL SCAN
and THANKS KARL.
Last edited by Dewey316; Oct 18, 2002 at 10:25 AM.
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
Mar 8, 2019 12:21 PM
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
Thirdgen89GTA
NW Indiana and South Chicago Suburb
0
Aug 20, 2015 03:11 PM
1992 Trans Am
Suspension and Chassis
1
Aug 9, 2015 04:32 PM
