I am buying a 9 bolt, it has the dust covers for the rear disk brakes but I don't know if it has the caliper brackets. Will the caliper brackets from my current rear (a ten bolt with rear discs from an 82) fit the bw 9 bolt?

I need to install this immediately. I don't have time to buy the le1 brake brackets or anything else.


in summation: Do the rear caliper brackets from an 82 ten bolt fit the axles to an 89 nine bolt?

I hope this isn't confusing.

 

No, 9-bolt brackets are designed to retain the axle. I'm pretty sure 10-bolt brackets won't work.

 

So, any suggestions on what I should do.

Should I buy the le1 brackets to hold my calipers.

I think I need to take a look at the 9 bolt again.

 

Here's what you need on Ebay.

http://cgi.ebay.com/ebaymotors/ws/eB...tem=1857295584

Then get the PBR brake setup for the rear. Otherwise, you'd need to modify some 10 bolt ones or weld them on.

Ed

 

Yeah! I have that part on there. (the one listed on ebay) So I guess that since that option was only availible for 89 and this is an 89 9 bolt, that I need to buy some PBR's.

What is the benefit of the PBR's?? (besides being all shiny and looking bad @ss)

how much are they??