Adjustable rear spring perch insert for a 4 or 5 inch spring?
Thread Starter
Member
iTrader: (2)
Joined: Apr 2001
Posts: 250
Likes: 0
From: Fort Wayne, Indiana, U.S.A.
Car: CTS-V & 89 Z28 vortech charged
Engine: LS6 & 383 charged stroker
Transmission: 6-speed & 5 speed
Adjustable rear spring perch insert for a 4 or 5 inch spring?
Does anyone have or know where to get a adjustable spring perch for the rear suspension? It allows you to run a 4-5 inch spring that can be bought in different load rates. Anyone?
Supreme Member
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
ground contol sells a rear spring pear for a 5.5 OD rear spring. i am not sure how much shorter than stock you can make it (i think probably 4-5" of adjustment.)
Banned
Joined: Nov 2002
Posts: 350
Likes: 0
From: Orange,Calif
I have made some custom brackets for the upper rear spring can so in the future (someday when I get the extra money) mount coilover shocks in the rear. What these brackets do is they will distribute the weight load of the car that will now rest onto the weak upper shock i-bolt mount back to the can area where the original coilspring rests holding the weight of the car. Diagram below.
Thread
Thread Starter
Forum
Replies
Last Post
