i just bought a kit from a lady on ebay, all hardware, adapter plates, every bolt washer , passenger side carrier, but no left handside one. i realize from usin the search it might be damn hard to find this carrier. but does anyone have any inside info about where i can get one from?
alloy
Supreme Member
close
Try contacting Steve Spohn. He has 1LE carriers.
i just need the LH side tho. he wants 195 bucks just for both. think he will sell em individually?
alloy
Supreme Member
close
Well all you can do is ask. Nothing ventured, nothing gained.
Wait till Monday though, he's not going to be near his computer this weekend.
Wait till Monday though, he's not going to be near his computer this weekend.
sounds like a plan, thanks.
talked to steve spohn, no go on that idea. anyone know where i can get a LH side carrier? this sucks, if worst comes to worst ill sell the RH side one and buy a pair from spohn.
hmm, 88-96 C4 brakes have the same carrier correct? if so i think i found one. will this work? and the dual piston PBR calipers are the HD or standard brakes on the c4?
http://www.corvetteamerica.com/main....TOKEN=53730374
http://www.corvetteamerica.com/main....TOKEN=53730374
Member
Not too sure on if bolt spacing for the corvette caliper is the same as the 1LE. I have corvette carriers, I can measure one, what is the spacing between the bolts on your carrier?
ill let u know when i get the kit i got thats missin the LH side carrier. im still waitin for the kit in the mail 

Member
As I am sure you have now read in your other post, the C-4 carrier is not the same as the 1LE carrirer.
I tried mocking up a C-4 caliper & carrier using a modified spindle & 1LE rotor. I don't think you can place the caliper in the same location as the 1LE- too much interference to get bolts in there to work.
Back to the drawing board.
I tried mocking up a C-4 caliper & carrier using a modified spindle & 1LE rotor. I don't think you can place the caliper in the same location as the 1LE- too much interference to get bolts in there to work.
Back to the drawing board.
i got the stuff in the mail finally. i really need to find a LH side carrier. ill even do this... if anyone out there needs a RH side on ill go halfway on a pair from spohn OR buy the pair from spohn and sell u the RH side carrier i have right now.
TGO Supporter
Good luck getting rid of the rh cradle. I was in the same boat and ended up giving the thing away on ebay(I think for $25), Then bought the set from Spohn.
i know man this sucks
Check with SSBC. They sold me the one carrier individually, but it is going to be pricey.
did u buy it over the internet or on the phone?
I ordered it by telephone. If you have a problem (for instance they don't know the p/n) let me know. I'm sure I've got it somewhere, although it may take awhile to find.

