Vibration.
Thread Starter
Member
iTrader: (1)
Joined: Oct 2003
Posts: 288
Likes: 0
From: South Carolina
Car: 1989 IROCZ
Engine: Rebuilt 350 TPI
Transmission: 700r4
Vibration.
Got a question, recently my IROC started riding a bit on the rough side, at slow speeds it feels like im going over speed bumps all the time, like, bump bump bump bump bump. At higher speeds it feels loose, but not as bumpy. Any ideas as to what could be causing this?
Senior Member
Joined: Dec 2001
Posts: 896
Likes: 1
From: Coquitlam, BC
Car: 86\92 Mutant
Engine: 355CI 430HP
Transmission: T-5 with mods
Axle/Gears: 7.625", Eaton Posi, 3.73
First thing I'd check is the tires. Check for out of round, flat spots or delamination. Check very carefully. A delamination may not be obvious at first...but can definately be a major concern.
Well, I heard this bump,bump, bump....
Well, I heard this bump,bump, bump....
Supreme Member

Joined: Jun 2001
Posts: 9,550
Likes: 4
From: Charleston, SC
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
Originally posted by dankhound
Whats delamination? Never heard that term before.
Whats delamination? Never heard that term before.
sometimes they can come apart.. esp in the high heat and high force settings of driving really fast.
thats your main worry when using tires below or near their speed rating.
btw while that pic he posted does show the layers, it looks like he flatspotted it really bad then pulled in...
Thread Starter
Member
iTrader: (1)
Joined: Oct 2003
Posts: 288
Likes: 0
From: South Carolina
Car: 1989 IROCZ
Engine: Rebuilt 350 TPI
Transmission: 700r4
thanks for the tips, ill check them ASAP! I did get free tires though, my friend that gave me his IROC rims works at goodyear and got them from the Z28 Highway Patrol cars that come in, each tire was brand new, seems the patrol car left and hit a nail on the way out and brought it right back in, and they replace all 4 tires each time. They are RSA's and GSA's, Z rated.
Thread Starter
Member
iTrader: (1)
Joined: Oct 2003
Posts: 288
Likes: 0
From: South Carolina
Car: 1989 IROCZ
Engine: Rebuilt 350 TPI
Transmission: 700r4
Still not sure how to post the picture here, but I went out and checked all the tires and one of the front tires felt really rough in one spot, ive loaded the picture on page 3 of my cardomain site if you want to see it, if you do look, could this be whats wrong?
http://camaroz28.cardomain.com/id/89irocztpi
http://camaroz28.cardomain.com/id/89irocztpi
Trending Topics
Senior Member
Joined: Dec 2001
Posts: 896
Likes: 1
From: Coquitlam, BC
Car: 86\92 Mutant
Engine: 355CI 430HP
Transmission: T-5 with mods
Axle/Gears: 7.625", Eaton Posi, 3.73
Originally posted by 89IROCZTPI
Still not sure how to post the picture here, but I went out and checked all the tires and one of the front tires felt really rough in one spot, ive loaded the picture on page 3 of my cardomain site if you want to see it, if you do look, could this be whats wrong?
http://camaroz28.cardomain.com/id/89irocztpi
Still not sure how to post the picture here, but I went out and checked all the tires and one of the front tires felt really rough in one spot, ive loaded the picture on page 3 of my cardomain site if you want to see it, if you do look, could this be whats wrong?
http://camaroz28.cardomain.com/id/89irocztpi
Can you swap it with a known good tire or set? Maybe take it to a reputable Tire Shopto look at if you know of one in your area. Word of mouth best bet.
Edit: On second look, it doesn't look well at all. 90% sure that is your problem.
Thread Starter
Member
iTrader: (1)
Joined: Oct 2003
Posts: 288
Likes: 0
From: South Carolina
Car: 1989 IROCZ
Engine: Rebuilt 350 TPI
Transmission: 700r4
After readin what you guys have said, I took it to a friend of mines that works at a tire shop and he said it was a flat spot and could definatly be the problem. Seems I got it from slamming on my brakes one morning. I was on a back road and came over a hill and a ford bronco was in my lane
I should be able to get another one though from my friend as soon as he goes back to work. Thanks for all the help!
I should be able to get another one though from my friend as soon as he goes back to work. Thanks for all the help! Thread
Thread Starter
Forum
Replies
Last Post
roysatikas
Transmissions and Drivetrain
0
Sep 22, 2015 08:15 PM




