lowering springs
Thread Starter
Supreme Member
Joined: Apr 2004
Posts: 1,077
Likes: 0
From: Denver, CO
Car: cleanest '86 sport coupe around!!
Engine: 355ci twin 66mm turbos on e85
Transmission: built rmvb th400 w/ t-brake
Axle/Gears: 3.23
lowering springs
I am redoing my front suspension and I got some hotchkis springs...my question is, which side of the front spring goes up into the frame, the flat side or the other end?
TGO Supporter
Joined: Jul 1999
Posts: 3,838
Likes: 4
From: Another world, some other time
Car: 86 LG4 & 92 TBI Firebird
Engine: The Mighty 305!
Transmission: 700R4
Axle/Gears: 3.42
Flat side up with the rubber isolator.
The lower a-arm is formed so the coil side fits into it. There should be 2 small holes. Line the spring up so the spring is covering 1/2 of the lowest hole.
The lower a-arm is formed so the coil side fits into it. There should be 2 small holes. Line the spring up so the spring is covering 1/2 of the lowest hole.
Thread
Thread Starter
Forum
Replies
Last Post
Thornburg
Suspension and Chassis
6
Sep 12, 2015 10:11 AM
