How to get the front end down
Thread Starter
Member
iTrader: (2)
Joined: Sep 1999
Posts: 384
Likes: 2
From: Canada
Car: 92 quasar gta
Engine: Nothing
Transmission: Nothing
Axle/Gears: 4.11s
How to get the front end down
Just curious whats gonna be the best way to get the front of the car down low without screwin stuff up..
This is for my 92 gta. Have a tubular k-member and an ls1 going in so i figure about 200lbs+ off the front of the car. I have jamex springs going in but im wondering if it would be wise to cut half a coil off or so due to the weight factor. I dont want it to be super low just how it would look stock with a 1.0" drop
Any idears or suggestions?
This is for my 92 gta. Have a tubular k-member and an ls1 going in so i figure about 200lbs+ off the front of the car. I have jamex springs going in but im wondering if it would be wise to cut half a coil off or so due to the weight factor. I dont want it to be super low just how it would look stock with a 1.0" drop
Any idears or suggestions?
Supreme Member
Joined: Jan 2002
Posts: 3,852
Likes: 1
From: Valley of the Sun
Car: 82 Z28
Engine: Al LT1 headed LG4 305
Transmission: TH350
Axle/Gears: 3.73 posi with spacer
Cut the springs when you get everything installed, or you will never know how much to cut.
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
Jun 13, 2021 01:13 PM