Let me know if there are any more and I will add them to the list. I find these on another page...

These do not include steelwheels. For a complete list of almost all of the manufactures for wheels, Click Here.

Aero Race Wheels - http://www.aeroracewheels.com/

American Racing Equipment - http://www.americanracing.com/

Bart Wheels - http://www.bartwheel.com/

Bassett Racing Wheel - http://www.bassettwheel.com/

BBS Wheels - http://www.bbs-ag.com/

Bogart Racing Wheels - http://www.bogartracingwheels.com/

Center Line Wheels - http://www.centerlinewheels.com/

Champion Wheels - http://www.championwheel.com/

Circle Racing Wheels - http://www.circleracing.com/

Compomotive Wheels - http://www.comp.co.uk/

Cragar Wheels - http://www.cragar.com/

Diamond Racing Wheels - http://www.diamondracingwheels.com/

Douglas Wheel, Inc. - http://www.douglaswheel.com/

Dymag Racing Wheels - http://www.dymag.com/

Goudy Wheels - http://www.goudywheels.com/

Ken Huff Racing Wheels — Land Speed Record racing wheels
10827 Larrylyn Drive
Whittier, CA 90603
(310) 943-6877

Independent Racing Wheel - http://www.irwheel.com/

Jongbloed Wheels - http://www.jongbloedwheels.com/

Keizer Aluminum Wheels - http://www.keizerwheels.com/

Kittyhawk Racing - http://www.roadsters.com/kittyhawk/

Ken Lowe Race Cars — front wheels for dragsters - http://www.kenlowe.com.au/

MRT — Marsh Racing Technologies - http://www.mrt-wheels.com/

Minilite Wheels - http://www.minilitewheels.com/

Momo Wheels - http://www.momorpm.com/

Monocoque Racing Wheels
San Diego, CA
(619) 448-2800

OZ Wheels - http://www.ozwheels.com/

PS Engineering
2675 Skypark Drive, #102
Torrance, CA 90505
(310) 534-4477

Glen Sander Engineering, Inc. - http://www.sanderengineering.com/

Superlite Wheels - http://www.superlite-wheels.com/

Taylor Made Wheels — Land Speed Record racing wheels
9220 South Atlantic Blvd., Building #29
South Gate, CA 90280
(213) 567-3998

Weld Racing Wheels - http://www.weldracing.com/

 

I would not use some of the ones mentioned in your list as racing wheels. You are also forgetting some of the big dogs:

Fikse
HRE
Simmons
ROH
ATP
Racing Hart

 

Somehow, they all misted the two that I would buy.

Forgeline (http://www.forgeline.com/)

CCW (http://www.ccwheel.com/)

 

I spent a whole day in his shop years ago watching him make my rear racing rims for the Vette from scratch. That was fascinating to see.
17x13's with 335/35-17.

 

Dean,

Only 13's ??? I thought you were all about the grip.

 

I gotta tell you John , it is a b*tch getting the rear of that car through the cones cleanly on the little chicanes. The car is 6" wider than my chev truck. I'm going to get the car back out and give it a go at Autox this year for old time sake. Se if I can handle it still. I don't think I have the strength to muscle that car through the little tight tracks anymore without powersteering.

 

Yeah, there is masive room for rubber under those C3's.

There is a C3 vert that runs Auto-x up here, it is ungodly fast. Just watching and listening to it while he runs it, gets me excited. I'm sort of in the market for a C3, but not look all that hard, as i don't really have room for another project now. Of course if a good deal on a pre-75 vert came along, i likely wouldn't turn it down.

 

There are a lot more at that page if you don't want to use the ones that I listed. I was just wanting everyone looking for wheels to have a selection.

 

On a side note, my bogarts weigh less than 12 pounds. The front's are even less.

 

Hey! That's where I live! Well, not in his shop though.

How old is this info though? That area code changed like years ago to 323.