i need some stiffer springs all around i have an rs but have done a 350 and other stuff and now i m getting to the handling since i have an rs the springs are slightly softerthan the Z28 should i go to 1le springs or after market and because of my driveweay i need atleast stock ride hight

 

If you need the stock ride height you will need to look into factory moog replacement springs. However, there is a good chance your currect springs are sagging. Therefore, any 1" drop aftermarket spring could keep your car at he same ride height that it is now. I would do some reading here on TGO about lowering springs. Use the search function to read up on the various springs offered for our cars.

 

A cheap way to go would be to go to Advance/Orieleys/Autozone, etc. and get some stock Z28 replacements. That's what I'm planning on since mine are sagging. It'll run a little over $100 for both of them.