Hmm..
Thread Starter
Senior Member
Joined: Jun 2003
Posts: 828
Likes: 3
From: Rockville, MD
Car: 1989 Camaro RS
Engine: Ellis Juan
Transmission: t-56
Hmm..
ok, so the patient im doing the transplant in has a pretty bad condition.. the trans crossmember bolts are broken in the frame. now i will try to drill them out but i dont know if itll work. i have 4 options:
1) drill the bastards out and hope for the best
2) cut out mentioned section and weld in a plate for the crossmember
3) part out car and buy a roller of the same year and options (with no motor or trans and no broken bolts) in as good or better condition
or 4) weld new trans crossmember in
im kinda down about it and dont really knw wht to do
1) drill the bastards out and hope for the best
2) cut out mentioned section and weld in a plate for the crossmember
3) part out car and buy a roller of the same year and options (with no motor or trans and no broken bolts) in as good or better condition
or 4) weld new trans crossmember in
im kinda down about it and dont really knw wht to do
Supreme Member
iTrader: (33)
Joined: Jul 2000
Posts: 5,945
Likes: 1
From: Boosted Land
Car: 92 Z28
Engine: Boosted LSX
https://www.thirdgen.org/forums/tran...er+bolts+broke
Another option is drill it out and weld new nuts in the top.
Another option is drill it out and weld new nuts in the top.
Thread
Thread Starter
Forum
Replies
Last Post