Suspension setup help
Thread Starter
Senior Member
Joined: Dec 2007
Posts: 614
Likes: 3
From: Missouri
Car: Camaro RS
Engine: obd2 350 lt1
Transmission: T56
Axle/Gears: 3.23
Suspension setup help
I am putting grey c6 wheels 18x8.5 and 19x10 with 285 rubber on the back i am also getting a new rearend from a late 80's camaro with limited slip and 3.42 gears while i am putting it in i thought i should upgrade my suspension. i need new shocks struts and springs. i want my car to be lowered so that it looks like kubus_stroinski 's car. will new shocks and struts raise my car? if so what springs do i need to be as low as his car? Thanks
Joined: Aug 2006
Posts: 12,807
Likes: 108
From: Central NJ
Car: 86 Trans Am
Engine: 408 stroker sbc
Transmission: TKO600
Axle/Gears: Moser full floater m9, 3:70 trutrac
Re: Suspension setup help
shocks and struts will not affect ride height
im not familiar with the car, but sportlines are low and inatrex are even lower.
maybe post a pic?
im not familiar with the car, but sportlines are low and inatrex are even lower.
maybe post a pic?
Thread Starter
Senior Member
Joined: Dec 2007
Posts: 614
Likes: 3
From: Missouri
Car: Camaro RS
Engine: obd2 350 lt1
Transmission: T56
Axle/Gears: 3.23
Re: Suspension setup help
https://www.thirdgen.org/forums/cama...pics-maro.html these are the most recent i do not have the wheels yet
i must have read it wrong here is kubus's car
https://www.thirdgen.org/forums/cama...ighlight=kubus
i must have read it wrong here is kubus's car
https://www.thirdgen.org/forums/cama...ighlight=kubus
Last edited by keeslinger31; Jun 9, 2008 at 12:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Sponsored Vendors
0
Sep 2, 2015 01:35 PM





