I just redid my brakes with new pads, rotors, and calipers. Now when I hit the brake pedal hard I have one front wheel that locks up while the rest of them don't. I didn't have this problem before changing my brakes. Is the problem caused by something I did wrong, or is it a bad part that I bought, such as the caliper? The calipers were remanufactured calipers.

 

Sounds like air in the lines. Try bleeding the brakes again. Start with the right rear, left rear, right front, left front, and then bleed the master. Good luck.

------------------
Rob
'86 TA 305 TPI