When i bought the car it didn't have the parts on the drivers side. i need to find the e brake arm , spring and ataching hardware for my driver side rear caliper. Question 1. are the parts to fix this available>? according to gm they are dicontinued.
2. i can get a new caliper through the parts store for 75.00 w/exchange. should i get a whole new one and let them rebuild it?
3. both of the rear calipers are 2000 miles new. can i just the drivers side, or do i NEED to get both?
thnx alot i want to get me e brakes working again. the shaggy iroc

------------------
'89 SHAGGY IROC
L98 7r4, all free stuff,T.E.S.,HOOKER CAT BACK,KYB,ACCEL8.8,JET fan sw. etc.
so much to do , so little money

 

I have the whole parts list at home. I have to get the numbers figured out though. I will try to remember to get them this week and make a list so people can do this swap.

James

------------------
If the women don't find you handsome they should at least find you handy
88 GTA Notchback with 91 gfx and ROH Snypers
Aftermarket T-56 (pain in the A$S but worth it)
Lots of things to do still

 

GOOD LUCK! I had the same problem. Discontinued from GM. Check out rebuilt calipers. No luck. Bought new AC Delco calipers (I was replacing them anyways) and they don't come with them. Contacted some junk yards. They kept coming up with the wrong parts (pre '89 parts). I finally had a local guy who has a 3rd gen used parts busness find my the parts. I had to buy the whole caliper as the yard he found it would only sell it that way. It's a real PITA. Again good luck.