Jamex Lower Springs
Thread Starter
Junior Member
Joined: Mar 2001
Posts: 55
Likes: 0
From: Burlington,NC
Jamex Lower Springs
Has anyone had or heard anything abut jamex lower springs for third gen's? I am abut to put on my kyb shocks and struts and i wanna kill 2 birds with one stone and i found a set of jamex progressive rated springs for $100 new...whatcha think?
------------------
1992 RS 25th anniversary..305 tpi conversion,slp headers,jet chip,3 inch flow master exhaust,3:73 richmond gears,big block style hood,80 degree tint,black outs,b&m megashifter,high rise spoiler,and much more.
Stereo
ioneer 8000R with organic screen,2 memphis 1000d amps(1100rms each) 4 memphis shp 12's 2 capasitors,audiobahn line driver,memphis crossover,stinger dry cell battery.
------------------
1992 RS 25th anniversary..305 tpi conversion,slp headers,jet chip,3 inch flow master exhaust,3:73 richmond gears,big block style hood,80 degree tint,black outs,b&m megashifter,high rise spoiler,and much more.
Stereo
ioneer 8000R with organic screen,2 memphis 1000d amps(1100rms each) 4 memphis shp 12's 2 capasitors,audiobahn line driver,memphis crossover,stinger dry cell battery. 
Supreme Member
iTrader: (1)
Joined: Feb 2000
Posts: 2,361
Likes: 1
From: Savannah, GA
Car: 1997 Jeep Wrangler
Engine: 4.0L
Transmission: 5 speed
Axle/Gears: 8.8 rear, 4.56 gears, 4:1 transfer
Excellant product for the money. I have them on mine, see my link for before and after pics.
------------------
86 Camaro Sport
383 Speed-O-Motive Crate Engine, Raptor 700R4 Tranmission, Trick Flow Twisted Wedge G2's, 58mm Accel TB, 3.73 Auburn Pro, SLP Cold Air Induction and Headers, Dynomax Cat-back, Serpentine Belt Setup, Dual IROC Fans, Jamex springs, 16" IROC Rims, 36mm/24mm Sway Bars, Global West Steering Brace. Hotchkis Rear LCA's,Panhard Bar and SFC's.
My Camaro Project
------------------
86 Camaro Sport
383 Speed-O-Motive Crate Engine, Raptor 700R4 Tranmission, Trick Flow Twisted Wedge G2's, 58mm Accel TB, 3.73 Auburn Pro, SLP Cold Air Induction and Headers, Dynomax Cat-back, Serpentine Belt Setup, Dual IROC Fans, Jamex springs, 16" IROC Rims, 36mm/24mm Sway Bars, Global West Steering Brace. Hotchkis Rear LCA's,Panhard Bar and SFC's.
My Camaro Project
Thread Starter
Junior Member
Joined: Mar 2001
Posts: 55
Likes: 0
From: Burlington,NC
How much did they lower the car? can u see the springs much cause my car is black and that would look hidious
------------------
1992 RS 25th anniversary..305 tpi conversion,slp headers,jet chip,3 inch flow master exhaust,3:73 richmond gears,big block style hood,80 degree tint,black outs,b&m megashifter,high rise spoiler,and much more.
Stereoioneer 8000R with organic screen,2 memphis 1000d amps(1100rms each) 4 memphis shp 12's 2 capasitors,audiobahn line driver,memphis crossover,stinger dry cell battery.
------------------
1992 RS 25th anniversary..305 tpi conversion,slp headers,jet chip,3 inch flow master exhaust,3:73 richmond gears,big block style hood,80 degree tint,black outs,b&m megashifter,high rise spoiler,and much more.
Stereo
ioneer 8000R with organic screen,2 memphis 1000d amps(1100rms each) 4 memphis shp 12's 2 capasitors,audiobahn line driver,memphis crossover,stinger dry cell battery. 
Senior Member
Joined: Feb 2000
Posts: 536
Likes: 0
From: College Station/Spring, TX
i cant see the springs on my car, maybe if you stick yer head in the wheel well you can see them but just by walking by i cant even notice the red powdercoat.
------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-Jamex Springs...and thats just about it till summer!
Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana
http://ScreaminDeamin.cz28.com
------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-Jamex Springs...and thats just about it till summer!
Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://users.argolink.net/bvana
http://ScreaminDeamin.cz28.com
Thread
Thread Starter
Forum
Replies
Last Post
Thornburg
Suspension and Chassis
6
Sep 12, 2015 10:11 AM
