I just purchased a disc brake rear end from a 1991 Firebird. What do I have to change on my 1992 Camaro RS to make this work? Should I also get the proportioning valve from the Firebird?
------------------
1992 Camaro RS 5.0 TBI A/T
Most of the Bolt-On Mods
------------------
1992 Camaro RS 5.0 TBI A/T
Most of the Bolt-On Mods
Supreme Member
Yep, all you need is the prop valve. You should buy new rear brake hoses, too. Brake hose deterioriates over time, 10 years sounds like a good replacement time. If you want, you can buy the valve new from GM. This might also be a good time to flush your brake system of old fluid. Enjoy the swap!
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l)
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l)
Supreme Member
Just bolt it on, the previous post covered what you need. Check the pads also.
