Lower shock mount...HELP!!!
#1
Junior Member
Thread Starter
Join Date: Jan 2011
Location: Kansas
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z/28
Engine: 5.7 TPI
Transmission: 700R4
Lower shock mount...HELP!!!
Is the round part in this picture an actual part of the lower rear shock mount, or was it a spacer that came with the shock that is just fused by all the rust..?....I couldn't get my lower shock bolts broke free at all, so I decided to cut the lower shock bolt off, and this particular part is still keeping the bolt from being removed..I greatly appreciate any info and "Thank You" in advance....
#2
Member
iTrader: (9)
Join Date: Jan 2009
Location: CT
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 IROC-Z/28
Engine: 357 HSR
Transmission: T-56
Axle/Gears: 3:73 w/Eaton Posi
Re: Lower shock mount...HELP!!!
mine came right out. onbolt it from both sides and pound it out. my new shocks came with new ones. if you need a pair of mounts, let me know. i have two new ones i didnt use
#3
Supreme Member
Join Date: Nov 2011
Location: CT
Posts: 2,748
Received 258 Likes
on
149 Posts
Car: 1984 Chevrolet Camaro Z28
Engine: 5.0 Liter 4-BBL V8 High Output
Transmission: 5-Speed Manual
Axle/Gears: 3.73
Re: Lower shock mount...HELP!!!
Thats Part Of The Shock Mounting Stud Probably Fused On, New Shocks Should Come With A New One Probably Look Something Like This.
Last edited by gt4373; 03-27-2013 at 09:31 AM.
#4
Junior Member
Thread Starter
Join Date: Jan 2011
Location: Kansas
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z/28
Engine: 5.7 TPI
Transmission: 700R4
Re: Lower shock mount...HELP!!!
Thanks for the replies/pic.....I went ahead and cut them off with the sawzall after literally beating on them with a hammer to no avail..They were rusted on so bad, that it looked like an actual part of the bracket...Makes me wonder exactly how long these shocks had actually been on this poor car.......Anyways, all is good now and I'll continue getting the rest of the suspension buttoned up next weekend....Going to order some lower control arms, and an adjustable panhard and hopefully get to take it out for a test spin soon......Thanks again!!!!!
Thread
Thread Starter
Forum
Replies
Last Post