need help with drag car project
#1
Junior Member
Thread Starter
Join Date: Aug 2012
Location: milan mo
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 formula
Engine: nasty 355 brodix heads all balanced
Transmission: turbo 350 4500 stall
need help with drag car project
i have a 91 formula with a pretty wild 355 , 3500 converter and a 9in w 456 gears . having a few problems and i think i know what i need to do but i know there are several of you guys running some real good 60s so i figured would get advice from guys who know .
car is currently running a set of lakewood lift bars with no torque arm .......i know i know everyone says thats a no no . the 9in was set up for ladder bars but had every mount except the torque arm mount . i know these cars can work very well i have seen it done . cant really afford the trial and error so i need some good advise guys . thanks a ton
car is currently running a set of lakewood lift bars with no torque arm .......i know i know everyone says thats a no no . the 9in was set up for ladder bars but had every mount except the torque arm mount . i know these cars can work very well i have seen it done . cant really afford the trial and error so i need some good advise guys . thanks a ton
#3
Junior Member
Thread Starter
Join Date: Aug 2012
Location: milan mo
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 formula
Engine: nasty 355 brodix heads all balanced
Transmission: turbo 350 4500 stall
Re: need help with drag car project
Car 60s like a station wagon and wont even try and hook on the street....its 60ing in the 90s
#5
Junior Member
Thread Starter
Join Date: Aug 2012
Location: milan mo
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 formula
Engine: nasty 355 brodix heads all balanced
Transmission: turbo 350 4500 stall
Re: need help with drag car project
28in et drags pulled from a buddies nova . It 60s in the 40s with them
#6
Junior Member
Thread Starter
Join Date: Aug 2012
Location: milan mo
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 formula
Engine: nasty 355 brodix heads all balanced
Transmission: turbo 350 4500 stall
Re: need help with drag car project
I was figuring without the torque arm it is just fighting its self on transfering weight .car weighs 3260
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM