In an effort to understand the good/bad about the thirdgen front suspension, I am working on 3D modeling all the relevant suspension points. The goal is to see what mods would result in what gain. Its probably been talked about to infinity, But I dont see much accurate data in a form I can understand.
I found this thread ,
https://www.thirdgen.org/forums/susp...ry-tweaks.html
"TankSinatra" was well on the way to doing what I wish to accomplish, But he never completely modeled the stock geometry, And hasnt logged on since 8/2019 without updating the thread. Shame, as it looks like he was a very good 3D modeller. Maybe realized he was too good for a thirdgen.
I need some accurate measurements to get good results, And my ThirdGen is in storage and very difficult to access for measuring the front suspension points. To start with, If anyone has a stock front K-member lying around that they could give me measurements off I would really appreciate it. Really just need the locations of the A-arm mounts relative to each other. I will post screenshots of the model as it comes together. Thanks.
Morrow, TedsGrad, SlickTrackGod, and many others I have stalked many of your threads and see a lot of info. Not trying to come on here acting like I invented it all.