i changed the shaft from the steering column to the steering box in my 86 iroc (noticed some rot) with the same part for a different car (another 86 iroc parts car). i also swaped the steering column aswell. after doing this operation my steering wheel was crooked a 1/4 turn to the right. what the hell is this. what happened and what can i do to fix this. any feedback is appectiated.

 

Park the car so the wheels are straight. Disconnect the intermediate shaft, turn the steering wheel straight, reinstall the shaft.

The steering wheel itself should be indexed on the shaft. (there is a spot in the splines that the sw lines up on)