cheaper cross drilled rotors.
Moderator
Joined: Apr 2000
Posts: 2,337
Likes: 2
Car: 87 IROC
Engine: modded LB9
Transmission: Pro Built 700R4
You could try the "free mod" that's in my other post.
https://www.thirdgen.org/techbb2/sho...threadid=92268
Serriously though, the $70 you mentioned is the best price I have heard of. The others I had seen were closer to $100 a piece.
Rob
https://www.thirdgen.org/techbb2/sho...threadid=92268
Serriously though, the $70 you mentioned is the best price I have heard of. The others I had seen were closer to $100 a piece.
Rob
Member
Joined: Apr 2001
Posts: 205
Likes: 0
From: Somewhere in Nebraska
Engine: turbocharged 4 cyl Dohc
Transmission: 5 spd sentronic
Cross-drilled
You can order them through Summitracing the brand is :POWER STOP By Auto specialty 79 a piece and you don't have to have special pads you can have a brake shop install them and use the semi metallic pads on them no harm will be done and the pads will last longer due thee the cooling effect of the drilled rotors
Supreme Member
Joined: Aug 1999
Posts: 2,842
Likes: 0
From: Woodland Hills, CA USA
Car: Yes...
Engine: Last time I checked...
Transmission: See "Engine"...
$70 a side is a good price for the AutoSpecialty cross-drilled rotors. That's what I paid for mine thru a local brake shop. Cross-drilled rotors aren't "all that" though. It's more cosmetic than anything.
There are slotted rotors selling on eBay for $99 a pair from a place called Hawks Racing. I just scored a pair of 1LE slotted rotors for $149 from them for my brake upgrade. I should receive the rotors next week.
IMHO the slotted rotors are the better way to go. They help the pads last longer and they can withstand higher temps than the cross-drilled rotors.
There are slotted rotors selling on eBay for $99 a pair from a place called Hawks Racing. I just scored a pair of 1LE slotted rotors for $149 from them for my brake upgrade. I should receive the rotors next week.
IMHO the slotted rotors are the better way to go. They help the pads last longer and they can withstand higher temps than the cross-drilled rotors.
Thread
Thread Starter
Forum
Replies
Last Post





