Who makes the best ignition components, msd?accel? I want a really good startup in all kinds of weather I think my car is lacking in that area. Dont start up like i want it to.

 

There are many good companies, i used msd edxclusively and have no problems. Start with a new set of wires and plugs then go with a new coil and finally an ignition box. I know people on here say the box is unecessary, but i did notice a difference in start up and smoothness with the msd 6a box. Go to ebay and check around for some deals. Plus if you ever do nitrous the extra spark can only help..haha

 

I have heard lots of good things about the superconductors, now my thing is what ones do i wanna get, i heard something about the boot if you have headers they have to be a certain kind of boot. I plan on getting headers possibley so what set of superconductors do i want, like a model number would help.

 

I have the super conductors, the stock ones for the 5.0 application of the Lo3. I don't have headers so i couldn't tell you if they would work or not though. my part number was121-3183-9 from jets for a stock 88 up car. Also i forgot to mention i used the msd cap and rotor too. A definite imporovement.

mike

 

do we use the same ignition components as the 305 tpi and 350 tpi cars?

 

i am pretty sure we do, although you could also get a universal set and cut your own wires, just get the non finished set of super conductors cut to length and crimp. That's what i did on my chevelle, made for you products has this set of looms for centerbolt valve covers which are pretty slick, but on the camaro/firebird, i think the emissions equipment would get in the way.