Today I was going to change my thermostat and the one bolt was not coming out and I got it to start turning and then it snapped into 2 and is now flush with the intake, my car is overheating badly now and smoking, smoke is coming into the cabin of the car as well. Any suggestions?

 

u can buy a "Easy Out" kit from Kragen or somewhere like that, drill a hole in the middle of the stud, tap the correct size easy out bit into the hole, and with a wrench, back it out. Me and my friend had to do this when we broke off the fuel filter thread in the carb for his 67 Mustang.

 

does the bolt that i broke bolt into the block or just the intake?

 

just the intake

 

ok screw it, im gettin the edelbrock intake to put on which model number is it?

 

EDL-3704 at summit

 

does it come with new intake bolts or no?

 

what size bolts do i need by the way thanks

 

go to summit racing's website www.summitracing.com , they have everything you need, if u type in the part number and click on the link that is associated with the intake, there is another link that lets you know "suggested parts", edelbrock has some intake bolts that have a cadnium finish and match the intake pretty well.