Prom burning
Thread Starter
Supreme Member
Joined: Aug 2002
Posts: 1,413
Likes: 0
From: San Pedro, Ca
Car: White KSwisses
Engine: 5.3L Gen III
Prom burning
wassup fellas?
Does the pocket programmer work for our proms (2732A)? The website says the programmer will support the 2732 but nothing about 2732A type proms. Thanks
KD
PS I know this is a DIY Prom question, but this is a TBI prom, so i thought i would ask u guys first.
Does the pocket programmer work for our proms (2732A)? The website says the programmer will support the 2732 but nothing about 2732A type proms. Thanks
KD
PS I know this is a DIY Prom question, but this is a TBI prom, so i thought i would ask u guys first.
Supreme Member
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
yes , as long as you have a UV earser to clear the proms.
you might consider switching to a moates adaptor and using the 29c256 flash proms, then no more bothering with the UV , and you can put 8 bin's on 1 chip, and switch between them
BTW, he just started making them again, i suggest getting one before he descides not to make them again.
you might consider switching to a moates adaptor and using the 29c256 flash proms, then no more bothering with the UV , and you can put 8 bin's on 1 chip, and switch between them
BTW, he just started making them again, i suggest getting one before he descides not to make them again.
Thread
Thread Starter
Forum
Replies
Last Post