I found one at a local salvage yard, he wants $150. THe unit is gross looking, i doubt the injectors are any good,Its covered in grease. (like i could use them anyway, or could I...hummm)
I know you can get a holley for around $300 so i was thinking $50-100 for the 454? Am i way off?

------------------
305 TBI
700-R4
L98 cam, 1 5/8 headers, 2 1/2 y-pipe, 4bbl edelbrock performer, holley adapter, open element K&N, afpr, flowmaster catback, MSD coil, accel wires cap & rotor, vette servos, shift kit, 2000 stall converter, TC lockup switch, all the free mods and some I left out.

 

I dont think you use those injectors anyways, I was told to use my sstock injectors in the 454 throttle body.

 

I am aware of this..but my stock injectors just arent enough at this point. I was thinking more along the future for the 454 injectors.

------------------
305 TBI
700-R4
L98 cam, 1 5/8 headers, 2 1/2 y-pipe, 4bbl edelbrock performer, holley adapter, open element K&N, afpr, flowmaster catback, MSD coil, accel wires cap & rotor, vette servos, shift kit, 2000 stall converter, TC lockup switch, all the free mods and some I left out.

 

i got one for like 114 off ebay. it does not have injectors but i would not have used them if it did.

HTH,
RS