L98 cam good for the L03?
Thread Starter
Junior Member
Joined: Dec 2005
Posts: 67
Likes: 3
From: Orlando, Florida
Car: 94 S10 soon to be 305TBI, 01 Blazer
Engine: 4.3 TBI, 4.3 CPI "01 Blazer"
Transmission: 4L60E's
L98 cam good for the L03?
Im doing a 305TBI swap inplace of my 4.3TBI in my S10, I have a L98 cam laying around from my old formula project, Was wondering if this would be a good cam choice or should I go with the LT1 cam????
Joined: Apr 2004
Posts: 3,001
Likes: 62
From: Salt Lake City, Utah
Car: 1988 camaro "SS"/ 1991 305/T5
Engine: 383 LT1 in progress/LT1TBI 355 soon
Transmission: Probuilt 700R4 3600 stall/ T5
Axle/Gears: Moser axles, 3.42 Eaton Posi
Re: L98 cam good for the L03?
it would depend on the year L98 it came out of due to the fact there are 3 different cams.
87- 14093643*
202/207 -.415/.404 114.5 LSA
88-89 10066049*
.207/213 - 415/.430 117LSA
90-92 10111773*
202/207 - .413/.428 114.5 LSA
I myself am planning to install the 88-89 cam here in the coming weeks. With 1.6 rockers it should be a fairly good cam
210/216 - .443/.459 117 LSA
87- 14093643*
202/207 -.415/.404 114.5 LSA
88-89 10066049*
.207/213 - 415/.430 117LSA
90-92 10111773*
202/207 - .413/.428 114.5 LSA
I myself am planning to install the 88-89 cam here in the coming weeks. With 1.6 rockers it should be a fairly good cam
210/216 - .443/.459 117 LSA
Thread Starter
Junior Member
Joined: Dec 2005
Posts: 67
Likes: 3
From: Orlando, Florida
Car: 94 S10 soon to be 305TBI, 01 Blazer
Engine: 4.3 TBI, 4.3 CPI "01 Blazer"
Transmission: 4L60E's
Re: L98 cam good for the L03?
Ahh thanx for the tip, I got to look into that not sure what year it is! Ill ask the guy who gave it to me, Im going to go the 1.6 route myself!
Joined: Sep 2006
Posts: 952
Likes: 2
From: Austria
Car: 84 TA / 89 Formula
Engine: LS1 / L03
Transmission: T56 / 700R4
Axle/Gears: 3.73 / 3.27
Re: L98 cam good for the L03?
what mods do you have to do for the heads to handle the lift from such a cam on 1.6 rockers? thx
Thread
Thread Starter
Forum
Replies
Last Post
1988iroc350tpi
Tech / General Engine
8
Aug 14, 2015 07:52 PM
