Dead Bird

Reply Subscribe

Thread Tools

Search this Thread

Apr 26, 2002 | 12:40 PM

BADBIRD87T/A

Thread Starter

Junior Member

Joined: Apr 2002

Posts: 4

Likes: 0

From: Detroit

Dead Bird

I HAVE A 87 305 TPI , TO DO A TUNE- UP I WILL NEED TO REMOVE MOST OF THE SMOG EQUIPMENT. IF I DO NOT REINSTAHL THE SMOG PUMP AND HOSES WILL IT CAUSE ANY PROBLES WITH THE COMPTER OR FUEL INJECTION OR MAKE THE CAR RUN DIFFERENTLY THEN WHEN THE EMMISSIONS SYSTEM WAS COMPLEAT.

Apr 26, 2002 | 12:52 PM

wasp

Senior Member

Joined: Feb 2002

Posts: 885

Likes: 0

From: saugerties new york

Car: 91 firebird,mint

Engine: 305 tbi,lots of work done

Transmission: 700-r4 built by level 10 in nj

Axle/Gears: 3.73, auburn , precision

no https://www.thirdgen.org/newdesign/t...rpentine.shtml

Apr 26, 2002 | 01:24 PM

BADBIRD87T/A

Thread Starter

Junior Member

Joined: Apr 2002

Posts: 4

Likes: 0

From: Detroit

NOW I CAN GET RID OF THE SMOG CRAP

THANKS FOR THE INFO
I WENT TO THE WEB SITE BUT I DONT THINK MY CAR HAS A SERPINTINE BELT

Last edited by BADBIRD87T/A; Apr 26, 2002 at 01:26 PM.

Apr 26, 2002 | 03:45 PM

Vader

Moderator

Joined: Jan 2000

Posts: 19,640

Likes: 306

87,

I'm not sure what you're calling "smog equipment", but you shouldn't have to remove anything that is emission related to change plugs, plug wires, distributor cap, rotor, clean the throttle body and IAC, set the timing, set the minimum air position and TPS voltage, replace filters, etc.

What in particular seems to be in the way of a "tune-up"?