altenator wont charge
Thread Starter
Junior Member
Joined: Mar 2002
Posts: 81
Likes: 0
From: Okinawa, Japan
altenator wont charge
I just got done putting my fan on a switch now the altenator isnt chargeing
I did away with the realy to do I need it for the altenator?? altenator was test and said to be good so where do the wires that plug into the altenator go
black=starter soenoid?
white=volt gauge?
red=power?
I did away with the realy to do I need it for the altenator?? altenator was test and said to be good so where do the wires that plug into the altenator goblack=starter soenoid?
white=volt gauge?
red=power?
Last edited by Dex; Jun 6, 2002 at 02:11 PM.
Moderator
Joined: Jan 2000
Posts: 19,653
Likes: 309
Dex,
The fan relay shouldn't have a direct impact on the alternator charging. It's more likely you disturbed some other wiring in the process of installing the control or removing the relay.
That large (usually red, sometimes black) wire from the alternator output stud is connected to the battery positive lead via a fusible link.
IIRC, the two wire connector to the regulator has a red wire connected at the starter (or other positive power node) and another wire to and ignition circuit (switched by ignition).
The fan relay shouldn't have a direct impact on the alternator charging. It's more likely you disturbed some other wiring in the process of installing the control or removing the relay.
That large (usually red, sometimes black) wire from the alternator output stud is connected to the battery positive lead via a fusible link.
IIRC, the two wire connector to the regulator has a red wire connected at the starter (or other positive power node) and another wire to and ignition circuit (switched by ignition).
Thread
Thread Starter
Forum
Replies
Last Post