Desk top dyno help, please.
Thread Starter
Supreme Member
Joined: Nov 2001
Posts: 2,743
Likes: 0
From: heartland
Car: 89rs (previous 2.8)
Engine: 406
Transmission: 700r4 (for now)
Desk top dyno help, please.
327csb .030 0ver. flattop pistons
350 heads basic street/strip poting job
edelbrock RPM intake / Holley 650 cfi DP
3" open element
Crane 1.6 Steel rollertip rockers
Crane cam. Advertised duration: 284 intake/284 exhaust
* Duration at .050 in. cam lift: 228 intake/228 exhaust
* Gross valve lift: .480 in. intake/.480 in. exhaust
* Lobe separation: 112 degrees
1 5/8 headers 3" dynomax no cat
3:42 gears/ 3000 stall/ 700r4
any and all suggestions on this combo accepted
350 heads basic street/strip poting job
edelbrock RPM intake / Holley 650 cfi DP
3" open element
Crane 1.6 Steel rollertip rockers
Crane cam. Advertised duration: 284 intake/284 exhaust
* Duration at .050 in. cam lift: 228 intake/228 exhaust
* Gross valve lift: .480 in. intake/.480 in. exhaust
* Lobe separation: 112 degrees
1 5/8 headers 3" dynomax no cat
3:42 gears/ 3000 stall/ 700r4
any and all suggestions on this combo accepted
Thread
Thread Starter
Forum
Replies
Last Post