Guys running 327's w/in--->

Reply Subscribe

Thread Tools

Search this Thread

Dec 17, 2002 | 08:17 PM

1QWIKZ

Thread Starter

Member

Joined: Oct 2001

Posts: 383

Likes: 0

From: S.Jersey

Car: 88 Camaro

Engine: 355

Transmission: TH-350

Guys running 327's w/in--->

I am curious to what cam and gearing you are running.

Cause I'm goin to do a cam swap and want to see what other people are running...........thanks

Dec 17, 2002 | 09:44 PM

chevymad

Senior Member

Joined: Sep 2001

Posts: 564

Likes: 2

From: Cathlamet, Washington

Car: 87 Formula

Engine: 327

Transmission: 700r4

Axle/Gears: 3.23

I'm running an XE256 and 3.23s.. Didnt want to go lower in the rear cause i'm only running a th350.. Turns 3200 on the freeway. The cam wasnt actually picked 4 the car.. Originally built the motor for my 70 pickup and wanted to keep the torque up. I'd probably only step up to the XE 262 anyway though.

Dec 17, 2002 | 09:46 PM

1QWIKZ

Thread Starter

Member

Joined: Oct 2001

Posts: 383

Likes: 0

From: S.Jersey

Car: 88 Camaro

Engine: 355

Transmission: TH-350

Quote:

Originally posted by chevymad
I'm running an XE256 and 3.23s.. Didnt want to go lower in the rear cause i'm only running a th350.. Turns 3200 on the freeway. The cam wasnt actually picked 4 the car.. Originally built the motor for my 70 pickup and wanted to keep the torque up. I'd probably only step up to the XE 262 anyway though.

Thanks for the response! What kind of times are you running with combo?

Dec 18, 2002 | 06:16 AM

ede

TGO Supporter

Joined: Aug 1999

Posts: 14,811

Likes: 1

From: Jackson County

it's a old crane hydrolic don't remember the specs, around .475 lift and 4:56 gears

Dec 18, 2002 | 08:47 AM

novadude

Junior Member

Joined: Jul 1999

Posts: 63

Likes: 0

From: Pittsburgh, PA

I am running a super-small cam in mine. It is a old General Kinetics cam 200/210 @ .050, .408/.430, 112LS. Damn near stock, so I wouldn't recommend it.

The XE262 looks real nice for a 327.