Few simple questions about my lo5 heads.
Thread Starter
Supreme Member
Joined: Dec 2001
Posts: 2,378
Likes: 1
From: Barboursville, WV
Few simple questions about my lo5 heads.
I have lo5 heads currently and 9.6:1 compression. Whats CC are my heads? 58 or 64? Im going to pick up a set of 416 (those 305 heads everyones porting from the l69) or more than likely a set of l98 heads. What CC are l98s and what size valves they have?
With ported l98 heads my mods and a 264 extreme energy cam what kinda power would i be making?
With ported l98 heads my mods and a 264 extreme energy cam what kinda power would i be making?
Supreme Member
Joined: Apr 2001
Posts: 4,969
Likes: 0
From: USA
Car: yy wife, crazy.
Engine: 350, Vortecs, 650DP
Transmission: TH-350
Axle/Gears: 8.5", 3.42
Re: Few simple questions about my lo5 heads.
Originally posted by TBI305Camaro
I have lo5 heads currently and 9.6:1 compression. Whats CC are my heads? 58 or 64? Im going to pick up a set of 416 (those 305 heads everyones porting from the l69) or more than likely a set of l98 heads. What CC are l98s and what size valves they have?
With ported l98 heads my mods and a 264 extreme energy cam what kinda power would i be making?
I have lo5 heads currently and 9.6:1 compression. Whats CC are my heads? 58 or 64? Im going to pick up a set of 416 (those 305 heads everyones porting from the l69) or more than likely a set of l98 heads. What CC are l98s and what size valves they have?
With ported l98 heads my mods and a 264 extreme energy cam what kinda power would i be making?
You must be running dome tops??? If you do have LO5 heads (14102191 or 14102193) then they're the crappy *** 'swirl port' heads that are good for RPM below 3000
I've heard they make great boat anchors especially since they DON'T FLOW AT ALL!!!!!!! LOL 
Thread
Thread Starter
Forum
Replies
Last Post
