Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

vibrations

Thread Tools
 
Search this Thread
 
Old Apr 1, 2003 | 09:32 PM
  #1  
btcamaro's Avatar
Thread Starter
Junior Member
20 Year Member
 
Joined: Sep 2002
Posts: 93
Likes: 0
Car: 91 Camaro
Engine: 383
Transmission: 700r4
vibrations

HITHERE am getting HITHERE really bad vibration aroung 65-70 mph, it seems to be coming from the driveline somewhere. It also seems to get worse when HITHERE take it out of gear and let it coast at that mph. Does anyone know what could be causing this?

thanks
Reply
Old Apr 2, 2003 | 05:04 AM
  #2  
Riley's35089rs+'s Avatar
Supreme Member
 
Joined: Nov 2001
Posts: 2,743
Likes: 0
From: heartland
Car: 89rs (previous 2.8)
Engine: 406
Transmission: 700r4 (for now)
tires out of balance...driveshaft (common).u-joint....tranny mount...motor mount....steering components.....I would start with having the tires balanced.
Reply
Old Apr 3, 2003 | 05:38 PM
  #3  
btcamaro's Avatar
Thread Starter
Junior Member
20 Year Member
 
Joined: Sep 2002
Posts: 93
Likes: 0
Car: 91 Camaro
Engine: 383
Transmission: 700r4
Well I took the driveshaft out and had it checked and it was out of balance while the shaft was out I turned the pinion just to check and I could feel the bearing grinding. I have not pulled it apart yet to verify but I hope it is only the bearings.
Reply
Old Apr 3, 2003 | 10:31 PM
  #4  
Riley's35089rs+'s Avatar
Supreme Member
 
Joined: Nov 2001
Posts: 2,743
Likes: 0
From: heartland
Car: 89rs (previous 2.8)
Engine: 406
Transmission: 700r4 (for now)
sounds like you found your problem...or problems . ....hopefully there is no damage in the rear..is the gear oil up to level? usually there will be some leakage with the bad bearing......any problems there?

Last edited by Riley's35089rs+; Apr 3, 2003 at 10:34 PM.
Reply
Old Apr 4, 2003 | 11:36 PM
  #5  
btcamaro's Avatar
Thread Starter
Junior Member
20 Year Member
 
Joined: Sep 2002
Posts: 93
Likes: 0
Car: 91 Camaro
Engine: 383
Transmission: 700r4
well I had to replace the pinion bearings but the gears were ok, I did find out that I have 3.23 gears and not 3.42 gears so I quess I need to change my sig.
Reply
Old Apr 5, 2003 | 01:54 AM
  #6  
Riley's35089rs+'s Avatar
Supreme Member
 
Joined: Nov 2001
Posts: 2,743
Likes: 0
From: heartland
Car: 89rs (previous 2.8)
Engine: 406
Transmission: 700r4 (for now)
amazing what you can discover, when you remove the cover!

Wow! I 'm a poet!

Have a great weekend!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
69GTOby
Tech / General Engine
40
Apr 18, 2016 02:34 PM
sac92transam
TPI
3
Oct 7, 2015 02:31 PM
roysatikas
Transmissions and Drivetrain
0
Sep 22, 2015 08:15 PM
BWilcox
Tech / General Engine
1
Sep 20, 2015 12:19 PM
InfinityShade
Transmissions and Drivetrain
3
Sep 18, 2015 08:32 PM




All times are GMT -5. The time now is 10:22 AM.