I found the Software to read what my computer is doing at:
http://www.techedge.com.au/vehicle/aldl/8192/8192hw.htm

Now I need the Dern Cable that hooks my car up to the computer. I'm not exactly electrically inclined, but i can do some stuff. Making one of those cables is beyond my reach of expertise. I want to buy one. Anyone know where I can buy one at a reasonable price.

Someone has these cables and they aren't telling me where to get them. I told you where to get the software now youtell me where to get the cable.

Thanks,
Lars

Sorry, that page will get you to this one: http://www.users.bigpond.com/paul_bl...0Downloads.htm
------------------
'92 RS 305 TBI
K&N Open Element
Ultimate TBI mod's (thanks Pablo)
Cam[.442"/.465" x 218*/224* @ .050", 10:1 Hypereutectic Pistons
Performer Manifold
Shift Kit, Corvette servo,
and 2800 Stall Trans Specialties Converter,
Gutted Cat, IAT Resistor
MSD Blaster Coil, Accel Cap and Rotor

[This message has been edited by lars92RS (edited August 01, 2000).]

 

Im going to attempt to build the cable from that website as soon as i can track down all the parts. Of course we need to build the more expensive 8192/160bps gajit rather than the simple 160bps one (which only works on cars switching from 0-12volts which i dont think any thirdgen does).

If anyone can help let me know

 

Lars92RS,
You can go and spend $90 from here for the cables that are like the ones you've seen. http://www.mindspring.com/~amattei/akmelect.htm

OR, you can e-mail me for more INFO



------------------
86 Camaro Sport
383 Speed-O-Motive Crate Engine, Trick Flow Heads, 58mm Accel TB, 3.73 Auburn Pro, SLP Cold Air Induction and Headers, Dynomax Cat-back, Serpentine belt setup.