Need a link to identify head casting marks (not #'s) on this 305 or 350 I've got. Can't find a site.

------------------
1966 c10 panel
1968 c20 350, 350
1982 camaro 305, th200

[This message has been edited by tpsierra (edited September 18, 2000).]

 

Check out Mad Mike's Page.

------------------
George P. Lara
1994 Z28 LT1 T56
1984 Z28 High Output
Member: SCCA, SCFB, SC3GFB

 

Here's another good one:http://www.mortec.com/castnum.htm


------------------
350 4 bolt main, Speed-O-Motive 383 stroker kit, re-sized rods ground for clearance,Hypereutectic pistons,9.8:1 compression,HPC Coated RPM intake, Speed Demon 750 cfm carb,World Products Sportsman II heads,2.02/1.60 valves, K-Motion springs, Comp Cam 1.6 roller rockers, Lunati adv.292/230@.050 with .512 lift,Crane pushrods,Proform HEI and MSD6A box,HPC coated 1 5/8 headers, 2.5" exhaust with 40 series mufflers,TH350 with B&M 3000 stall, Powertrax NoSlip Locker, 4.11 gears.