White Gauge Faces for ALL 3rd and 4th gen Fbodies
Thread Starter
Senior Member
Joined: Jun 2000
Posts: 712
Likes: 0
From: Los Angeles, Ca, USA
Car: 90 Camaro RS
Engine: 305 TBI
Transmission: T56
White Gauge Faces for ALL 3rd and 4th gen Fbodies
MODERATORS
lease dont erase this post...this is the most active board and i am trying to reach as many people as possible. Thank you
Is anyone interested in white gauge faces for a Group Purchase on white gauge faces for all 3rd and 4th gen f bodies. Macewen motorsports offers them and is willing to give 15% off of the price. (about $70-85) before discount. although it is not listed on the web page, they do offer 97-up camaro gauges....but they are in the making and will be released in late october. if you want...you can pre-order/reserve yours at the discounted rate and receive them when they are released. IF YOU ARE INTERESTED...EMAIL ME AND I WILL GIVE YOU ALL THE INFO.
here is the web page... http://members.aol.com/rmacewen1/
lease dont erase this post...this is the most active board and i am trying to reach as many people as possible. Thank youIs anyone interested in white gauge faces for a Group Purchase on white gauge faces for all 3rd and 4th gen f bodies. Macewen motorsports offers them and is willing to give 15% off of the price. (about $70-85) before discount. although it is not listed on the web page, they do offer 97-up camaro gauges....but they are in the making and will be released in late october. if you want...you can pre-order/reserve yours at the discounted rate and receive them when they are released. IF YOU ARE INTERESTED...EMAIL ME AND I WILL GIVE YOU ALL THE INFO.
here is the web page... http://members.aol.com/rmacewen1/
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
I already put an answer on the other board, but I'm in as long as the thirdgen gauges are part of the GP.
------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
"I didn't know a bored out Ford could go so slow" -Shenandoah
------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
"I didn't know a bored out Ford could go so slow" -Shenandoah
if anyone wants to see what they look like in a real car mine is on the macewen page or at www.geocities.com/jptaylor2/FIREBIRD.html
theyre easy to install and look great.
jptaylor
theyre easy to install and look great.
jptaylor
im in keep me informed
------------------
1992 camaro RS
327 posi 9 bolt rearend
ssm sfc's
87 350 TPI
bored 30 over
compucam 2032 with 1.6
482-495 LIFT 214-220 duration full roller rockers
msd6AL
1 7/8 headman headers
2 `1/2 flowmaster exuast
k&n filters gutter air box gutted maf
3 pc under drive pulleys
no emissions no egr etc
custom ED Wright chip
eddelbroc intake base and runners ported plenum
midly ported and polished stock heads
Taylor 8mm wires
B&M mega shifter
------------------
1992 camaro RS
327 posi 9 bolt rearend
ssm sfc's
87 350 TPI
bored 30 over
compucam 2032 with 1.6
482-495 LIFT 214-220 duration full roller rockers
msd6AL
1 7/8 headman headers
2 `1/2 flowmaster exuast
k&n filters gutter air box gutted maf
3 pc under drive pulleys
no emissions no egr etc
custom ED Wright chip
eddelbroc intake base and runners ported plenum
midly ported and polished stock heads
Taylor 8mm wires
B&M mega shifter
Trending Topics
I'm in, I want to get the ultra bright bulbs too. DaveM326@aol.com
------------------
86 Iroc, 383 Ported Sportsman II, Ported RPM Airgap, 750 Holley Vac. Sec., Slp 1 3/4, Comp Cams roller 218 224, 10" 2600 stall, Fairbanks 700r-4 W/superflow pro pump, 2.73 posi 87 K30 Chevy P/U 355 TPI TH400, headers and 2 1/2 duals, flowmasters, 8" lift, 36" super swampers, 4.10 detriot lockers all the way around
------------------
86 Iroc, 383 Ported Sportsman II, Ported RPM Airgap, 750 Holley Vac. Sec., Slp 1 3/4, Comp Cams roller 218 224, 10" 2600 stall, Fairbanks 700r-4 W/superflow pro pump, 2.73 posi 87 K30 Chevy P/U 355 TPI TH400, headers and 2 1/2 duals, flowmasters, 8" lift, 36" super swampers, 4.10 detriot lockers all the way around
DOHHHH!!!! i already bought my set!!! damn it all!!!!!!!
------------------
1988 Formula, 305TPI, 700r4(for now), headers, stage 2 PROM, modded MAF, cat back, no catalytics, cowl hood, centerline champ 500 rims, KOBEL predator ground effects kit, Trans AM tailights, dash pouch, 92 shift console w/indicator, white face gauges, accented red trim, 12 speaker stereo, 4 amps, tint, T tops... icq 44373460 AIM:admrlam
see it at www.geocities.com/admrlam/bird.html
------------------
1988 Formula, 305TPI, 700r4(for now), headers, stage 2 PROM, modded MAF, cat back, no catalytics, cowl hood, centerline champ 500 rims, KOBEL predator ground effects kit, Trans AM tailights, dash pouch, 92 shift console w/indicator, white face gauges, accented red trim, 12 speaker stereo, 4 amps, tint, T tops... icq 44373460 AIM:admrlam
see it at www.geocities.com/admrlam/bird.html
I guarantee that they look SWEET at least on my Firebird.
Those were the best beautification purchase I personally did on my bird.
A shame I don't have the picture of them yet, but I say GO FOR THEM people.
------------------
'89 Formula 305 TPI T-5
Check out my car HERE!
Those were the best beautification purchase I personally did on my bird.
A shame I don't have the picture of them yet, but I say GO FOR THEM people.
------------------
'89 Formula 305 TPI T-5
Check out my car HERE!
Thread
Thread Starter
Forum
Replies
Last Post





