Anyone know a source for a screw in rocker stud that does not require the bosses to be milled down. I am not installing guide plates. My current press in studs have a hieght of 1.40 and all the studs i have found from ARP and Comp are 1.75 from the base of the hex to the top of the threads. It does'nt have to have a hex base. A 7/16 nc x 3/8nf stud with a shoulder and the right height is all i need.

Thanks

 

Mr Gasket sells them. I'm not sure that they're 7/16" though, might be 3/8".