1.6 Roller Rockers--Should I Get Them?
Thread Starter
Senior Member
Joined: Jan 2000
Posts: 634
Likes: 0
From: Essex, Ontario, Canada
1.6 Roller Rockers--Should I Get Them?
With my mods and times below would the 1.6 rollers do much for me? I know, why not just get a cam but heads/cam/intake are probably about 2 years away.
How much improvement would the rockers give me in the quarter mile?
I usually run 13.9-14.0 but would like to be consistently high 13's (at least) for now.
Thanks!
Bob
------------------
350 TPI, 700R4(rebuilt), K&N's, MSD 6AL, Headers, Flowmaster, 160* stat, airfoil, MAF screens cut out. 13.88 @ 101.18 mph
How much improvement would the rockers give me in the quarter mile?
I usually run 13.9-14.0 but would like to be consistently high 13's (at least) for now.
Thanks!
Bob
------------------
350 TPI, 700R4(rebuilt), K&N's, MSD 6AL, Headers, Flowmaster, 160* stat, airfoil, MAF screens cut out. 13.88 @ 101.18 mph
TGO Supporter
Joined: Aug 1999
Posts: 14,811
Likes: 1
From: Jackson County
you won't see a lot of advantage from 1.6 rockers. a little and when used with other mods will add up but for the cost i'd save the money for cam, intake, heads.
------------------
-=ICON MOTORSPORTS=-
------------------
-=ICON MOTORSPORTS=-
TGO Supporter
Joined: Jul 1999
Posts: 10,907
Likes: 5
From: The Bone Yard
Car: Death Mobile
Engine: 666 c.i.
1.6s will probably give you another 10 HP or .1 sec in the 1/4...maybe .2 but not much more. Also, if your engine has a bit of miles on it, you really should change the valve springs too. On a higher mileage engine, 1.6s could be the kiss of death for your stock springs. Better to be safe than sorry.
Thread
Thread Starter
Forum
Replies
Last Post
KO1
Engine/Drivetrain/Suspension Parts for Sale
16
Oct 15, 2015 05:00 PM