Heres what Rich said at Cruzin
Thread Starter
Supreme Member
iTrader: (8)
Joined: Jan 2000
Posts: 3,968
Likes: 1
From: Macedonia ,OH
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Heres what Rich said at Cruzin
I sent all 8 of my 89 Injectors to get cleaned, and he calls me about 3 days later and says I hate to tell you this but they ALL were shot. It wasnt even worth cleaning them and basically ALL 8 are paper weights. He said do you want me to pitch them or send them back. I said keep them. So what do I do now?
How hard was it to remove your injectors? I've been thinking about doing this for awhile and it seems like winter would be a good time to do it. Do you have the website for cruizin?
If they are all shot, it looks like its time for new ones, i really dont know what to recommend since i havent had to deal with that.....yet.
------------------
1986 Trans Am
305 TPI
"If it's not one thing, it's another!"
http://www2.hanover.edu/hierlmeier
If they are all shot, it looks like its time for new ones, i really dont know what to recommend since i havent had to deal with that.....yet.
------------------
1986 Trans Am
305 TPI
"If it's not one thing, it's another!"
http://www2.hanover.edu/hierlmeier
Mkos,
WOW! They must have been pretty bad if Cruzin' Performance said they aren't worth the trouble. Did you ask Rich if he had any extra sets to sell?
Another option is the biggest swap meet on the web, eGay.
------------------
Later,
Vader
------------------
"Make Me Bad"
Adobe Acrobat Reader 4.0
WOW! They must have been pretty bad if Cruzin' Performance said they aren't worth the trouble. Did you ask Rich if he had any extra sets to sell?
Another option is the biggest swap meet on the web, eGay.
------------------
Later,
Vader
------------------
"Make Me Bad"
Adobe Acrobat Reader 4.0
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
Mkos, cheer up- just think of how much better your car will act when you get some new ones! You could always get some out of a junkyard...
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!
Member
Joined: Sep 2000
Posts: 377
Likes: 0
From: Edmonton Alberta
Car: Trans AM
Engine: 305 TBI
Transmission: 5spd
https://www.thirdgen.org/messgboard/...ML/002672.html
This was a post regarding other options for injectors. I dont know if this will help or not, but the SVO injectors are cheaper (according to the post). GM injectors: 137$ to Ford SVO: 25$.
Again I hope this helps (I might have mistook the post and thought it meant something else)
------------------
Godti
'89 Trans Am (Red)
305 TBI 5spd
This was a post regarding other options for injectors. I dont know if this will help or not, but the SVO injectors are cheaper (according to the post). GM injectors: 137$ to Ford SVO: 25$.
Again I hope this helps (I might have mistook the post and thought it meant something else)
------------------
Godti
'89 Trans Am (Red)
305 TBI 5spd
Trending Topics
Thread Starter
Supreme Member
iTrader: (8)
Joined: Jan 2000
Posts: 3,968
Likes: 1
From: Macedonia ,OH
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
Well I was going to buy a set of 22's off ZBRA, but he wrote today and said they were taken. If he writes back again and says they are sold for good. I will get the SVO's then or Accel's for 224.99
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
Sorry dude, I got ZBRA's injectors. 
I'd stick with the 22lbs for your combo. You only need 24lbs if youre moving a lot of air, like with a forced induction setup, or a full aftermarket intake.
------------------
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.25 @ 107.18 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-

I'd stick with the 22lbs for your combo. You only need 24lbs if youre moving a lot of air, like with a forced induction setup, or a full aftermarket intake.
------------------
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.25 @ 107.18 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-
Thread
Thread Starter
Forum
Replies
Last Post









