Hey i was flippin through my jeg's catalog lookin for a new set of heads and a cam and i came across this combo they have advertised. It has a holley intake manifold. SystemMax alumiun heads with 2.02/1.60" valves. Lunati hydraulic camshaft and lifters at 235*/240* duration @.050". Cam at 290*/297* advertised duration, 490"/490" lift, 112* lobe separation, 107* lobe centerline, double roller timing chian set, hardened pushrods and assembly. Would this set up work on my early 80's block small block 350. I have headers already if that helps. And if so is it worth $1,315.99? Cause i really don;t want the intake cause i was goin to buy a barely used RPM intake and elderbrock performer 600 cfm off a friend for a good price.

 

i'd buy the lunati/holley parts long before i would anything from edlebrock, reguardless of the price.