Administrivia (A.K.A. cleaning the desk.)
Administrivia (A.K.A. cleaning the desk.)
Fernando of the north -
The valve seal kit you are looking for should be GM P/N 12511890. It consists of eight of each of two different part number seals. The brown one are intake and white ones are exhuast.
- - - - - - - - - - - - - - - - - - - -
Ed,
There is rumored to be a cast nodular crank for the 262 inch V-6. Prob'ly a stock item in the performance truck engines.
- - - - - - - - - - - - - - - - - - - -
RD,
Thanks for the ideas - keep them coming. All this four-cylinder madnes is hampering our ECM-modifying efforts.
------------------
Later,
Vader
------------------
"No matter how hard you try you can't stop us now"
Adobe Acrobat Reader 4.0
The valve seal kit you are looking for should be GM P/N 12511890. It consists of eight of each of two different part number seals. The brown one are intake and white ones are exhuast.
- - - - - - - - - - - - - - - - - - - -
Ed,
There is rumored to be a cast nodular crank for the 262 inch V-6. Prob'ly a stock item in the performance truck engines.
- - - - - - - - - - - - - - - - - - - -
RD,
Thanks for the ideas - keep them coming. All this four-cylinder madnes is hampering our ECM-modifying efforts.
------------------
Later,
Vader
------------------
"No matter how hard you try you can't stop us now"
Adobe Acrobat Reader 4.0
well vader it seems the closer i get to being done the more good parts i find out about. i'm pretty much dead in the water for a while waiting on special order parts, roller timing chain and gears from edlebrock, the 1318 rockers from comp, spring cups from lunati. i've got to much in my heads and crank to go swaping them now, i'll see how it works out and go from there. sort of playing around with combinations for a 396 for my "old"car, after the 85 is done. plus we're pulling the engine and trans out of my sons car. he's going with a bigger cam, from lunati, dart heads, weiand intake and bigger holley. maybe more converter too. while the trans is out i'm going to weld up a couple of holes and retap, he's pulled the bolts out of for the trans mount.
------------------
-=ICON MOTORSPORTS=-
1st & 3rd
------------------
-=ICON MOTORSPORTS=-
1st & 3rd
Supreme Member
Joined: Apr 2000
Posts: 3,187
Likes: 0
From: E.B.F. TN
Car: Tree Huggers
Engine: Do Not
Transmission: Appreciate Me.
Originally posted by Vader:
...
RD,
Thanks for the ideas - keep them coming. All this four-cylinder madnes is hampering our ECM-modifying efforts.
...
[/B]
...
RD,
Thanks for the ideas - keep them coming. All this four-cylinder madnes is hampering our ECM-modifying efforts.
...
[/B]
I'm also trying to find out how that 'translator' works for the GN guys. Grumpy says it's not a pot. so I have to do some more digging. We'll see.

------------------
"The people always have some champion whom they set over them and nurse into greatness... This and no other is the root from which a tyrant springs; when he first appears he is a protector.
-Plato
Thread
Thread Starter
Forum
Replies
Last Post
sailtexas186548
Engine/Drivetrain/Suspension Parts for Sale
8
Feb 17, 2017 03:07 PM
WhteRbt
Tech / General Engine
2
Sep 21, 2015 09:48 AM









