Okay the wife was out delivering news papers and went into a 150 ft slide in her van which knock the drive belt off Anyways she managed to get it back home just in time for me to try to go out in 6" of unplowed snow in my camaro,told her it couldn't be done and after her i made her push after the third or fourth time after getting majorly stuck she began to realize i knew what i was talking about for once. The idiots who had the van before us took the belt routing sticker off the hood so i was just winging it when putting the belt back on. Now she has no heat so i decided to replace the thermostat and flush the system, when i found gunk in the system of what looked like bars stop leak in it. Still no heat i can feel pressure going into one hose to the heater core but the other hose has no pressure in it at all. When i took the radiator cap off , feels like no pressure either after it ran for like 45 minutes. I am thinking i put the belt on wrong and maybe i have the water pump running in the wrong direction. Anyone know where i can get a belt diagram for a 94' Plymouth Grand Voyager 3.3 Liter v-6 ??? Stores are all closed here so i can't get a haynes manual and i'de like to get her some heat before she has to go back out at 3 am.....