When adjusting my steering box, you know that bolt and hex head thingy on the steering box.
How much do I turn it, the hex head once I break the bolt loose? To take out the play in my steering wheel?

About how many turns is to much, how many turns have you guys done yours so I can get an idea?


------------------
microtech8@triad.rr.com

1987 White IROC-Z
305 TPI LB9 273 Rear Gear
700-R4 auto tranny
97,000 miles
KYB's
Performance Resource Chip
Flowmaster Muffler
Ported/Polished Plenum by "Daniel Burk"
Holley AFPR
Throttle Body Coolant bypass
TPIS air Foil
TPIS MAT Relocation Kit
K&N's
Gutted air box
Accel 8.0 plug wires
Moroso Super Coil
Blue Streak Cap and Rotor
Boush Patinum +4's
Mobil 1 15/50 Synthetic motor oil
Mobil 1 synthetic Trans fluid.
My Car: http://albums.photopoint.com/j/ViewP...240&p=36621420

 

i always had someone work the wheel while i tightned the screw ,it doesn't take much. when they feel the play going out of it stop and tighten the jam nut down.

------------------
ICON Motorsports
1st & 3rd