Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Are 30 lbs injectors too big?

Thread Tools
 
Search this Thread
 
Old Mar 9, 2001 | 10:55 AM
  #1  
Joseph Andres's Avatar
Thread Starter
Senior Member
iTrader: (6)
 
Joined: Oct 2000
Posts: 663
Likes: 0
From: NJ, USA
Car: 1991 GTA Convertible
Engine: 350
Transmission: 700R4
Axle/Gears: 3.73
Are 30 lbs injectors too big?

Will 30 lbs. SVO injectors work with my set up? Check my sig below for mods. Also check the dyno runs at http://www.geocities.com/thegta I was running very lean at all of the runs. We raised fuel pressure from 49-62 psi hose off which netted a 40 HP increase but still lean. I know that I will need the PROM to be reprogrammed to lean the fuel delivery at idle so that the car will run correctly. I am currently running 22 lbs. injectors.

------------------
1988 GTA 5.7L TPI Auto
355 ci. block, SLP Cold Air Intake w/ K&N, fully modified MAF Sensor, TPIS 52mm Throttle Body w/Air Foil, Fully Ported and Polished Plenum, Nikel-plated Ported SLP Siamesed Runners, Ported TPIS Big Mouth Intake Manifold, stock heads w/ 1.52 Comp Cams Self-aligning Roller Rockers, TPIS ZZ-9 Roller Camshaft, TPIS Valve Springs, Cloyes True Double Roller Timing Chain, TPIS Adjustable Fuel Pressure Regulator, Balanced Bosch 22 lb/hr Fuel Injectors, MSD 6AL, Taylor 10mm Wires, Bosch Platinum +4 Spark Plugs, MSD Blaster Coil, March Underdrive Pulleys, 6 3/4" Vibratech Streetdamper, TPIS Level 4 PROM, 160 T-stat, Low Temp. Fan Switch, Stock Distributor w/ Bronze Gear, SLP 1 3/4" Headers, Random Technologies High Flow Cat., Adjustable Borla Cat Back Exhaust, Flow Tech Pre-Cat 3" Exhaust Cut Off, Level 10 PTS-3 700R4 Trans, B&M Holeshot 2400 Stall Converter, B&M Trans Cooler, TCI Aluminum Finned Trans Pan, Torque Converter Lock Up Switch, 3" Balanced Aluminum Driveshaft, 3.73 Richmond Gears, Auburn Pro-Series Differential, Aluminum Differential Cover w/ Main Cap Preloads, BF Goodrich Drag Radials 255/50 R16, Hotchkis Lower Control Arms, Hotchkis Panhard Rod, Hotchkis Tie Rod Adjuster Sleeves, Bilstein Heavy Duty Shocks and Struts, 1LE Springs, Energy Suspension Polyeurethane Bushings, Global West Tubular Subframe Connectors, Global West Steering Box Brace, HP Motorsports 3 Point Strut Tower Brace

"Why ride a stang when birds can fly?"

http://www.geocities.com/thegta

[This message has been edited by Joseph Andres (edited March 09, 2001).]

[This message has been edited by Joseph Andres (edited March 09, 2001).]

[This message has been edited by Joseph Andres (edited March 09, 2001).]

[This message has been edited by Joseph Andres (edited March 09, 2001).]

[This message has been edited by Joseph Andres (edited March 09, 2001).]

[This message has been edited by Joseph Andres (edited March 09, 2001).]
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
webeeZ28
Tech / General Engine
12
Sep 14, 2015 12:00 PM
Nick McCardle
Firebirds for Sale
1
Sep 10, 2015 08:36 PM
Strick1
LTX and LSX
2
Sep 4, 2015 07:11 AM




All times are GMT -5. The time now is 06:17 AM.