JetHot Coating an engine block?
Thread Starter
Supreme Member
Joined: Jul 1999
Posts: 1,817
Likes: 1
From: Plano, TX
Car: 1992 RS
Engine: 406 Stealth Ram
Transmission: 700R4
JetHot Coating an engine block?
Has anyone done this? Would it flake off? There is a company local to me that does a similar type of coating, and I was wondering if it would work? Would it cause the block to get too hot, since it is designed to keep heat in? It sure would look nice! Thanks guys!
Senior Member
Joined: Feb 2000
Posts: 769
Likes: 0
From: Stillwater, OK
You could have it powdercoated, but you want the engine to disappate heat, not retain the heat.
------------------
350 4 bolt main, Speed-O-Motive 383 stroker kit, re-sized rods ground for clearance,TRW Forged pistons,10.7:1 compression,HPC Coated RPM intake, Holley 750 cfm carb,World Products Sportsman II heads,2.02/1.60 valves, Comp Cam 1.6 roller rockers, Comp Xtreme 284 cam,240/246@.050 with .540 lift,Crane pushrods,ATI damper,Proform HEI and MSD6A box,HPC coated 1 5/8 headers, 2.5" exhaust with 40 series mufflers,TH350 with Hughes 3000 stall, Powertrax NoSlip Locker, 4.11 gears.
------------------
350 4 bolt main, Speed-O-Motive 383 stroker kit, re-sized rods ground for clearance,TRW Forged pistons,10.7:1 compression,HPC Coated RPM intake, Holley 750 cfm carb,World Products Sportsman II heads,2.02/1.60 valves, Comp Cam 1.6 roller rockers, Comp Xtreme 284 cam,240/246@.050 with .540 lift,Crane pushrods,ATI damper,Proform HEI and MSD6A box,HPC coated 1 5/8 headers, 2.5" exhaust with 40 series mufflers,TH350 with Hughes 3000 stall, Powertrax NoSlip Locker, 4.11 gears.
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM
