Engine Knock
#1
Junior Member
Thread Starter
Join Date: Jan 2005
Location: queens,NY
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 GMC TYPHOON #1796
Engine: 4.3 TURBO
Transmission: 700R4
Engine Knock
IS THERE ANY GOOD GM GUYS OUT THERE THAT CAN HELP ME WITH MY ENGINE KNOCK THAT LIVES IN NY.
#3
Member
Join Date: Jul 2001
Location: Walnut Creek, CA
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro Sport Coupe Convertible
Engine: Your Momma
Transmission: I can go forwards and backwards
You'll probably need a rebuild.
If you can do it yourself, it'll be cheap, if you can't, then having a new engine installed might be the best route.
If you can do it yourself, it'll be cheap, if you can't, then having a new engine installed might be the best route.
#4
Junior Member
Thread Starter
Join Date: Jan 2005
Location: queens,NY
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 GMC TYPHOON #1796
Engine: 4.3 TURBO
Transmission: 700R4
thats easy to say but all the guys I talk to that own these trucks say that this is a common problem due to an ignition problem or in the timing so before I rip out the engine id like to be 100% sure that it is the motor
#5
Senior Member
Join Date: Oct 2004
Location: Smithfield, NC
Posts: 575
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro SC
Engine: 2.8L MPFI (rebuilt)
Transmission: 700R4 swapped to T5
Axle/Gears: 3.42 open
http://www.gm-trucks.com/forums/
Why don't you try this other forum for trucks.
This one is for 3rd gen f-bodies only.
Why don't you try this other forum for trucks.
This one is for 3rd gen f-bodies only.
Thread
Thread Starter
Forum
Replies
Last Post